Marmitek 20097/130405 owner manual Setting the standard volume for the satellite receiver

Page 10

•You can only learn the codes for one original remote control per mode, e.g. the codes for your DVD remote control under the DVD button. With some combi devices (e.g. a TV with built-in DVD player) you first have to learn the TV functions in TV mode and then the DVD functions in DVD mode.

Learning the commands

1.Point your existing remote control at the Marmitek EasyControl 6 remote control (front to front). Keep a distance of 2,5 cm between the remote controls.

2.Press the SETUP (9) button until one of the Mode LEDs stays lit. Release the SETUP (9) button.

3.Press the Mode button (TV, AUDIO, SAT, etc.) for the device you want to learn. The LED will flash once.

4.Press the LEARN (3) button. The LED will flash once.

5.Press the button on the Marmitek remote control you want to store the new command under. The LED will blink once.

6.Depending on the type of remote control you have, you can use one of two methods:

a.Press the button on the existing remote control you want to learn. Keep this button pressed until the LED on the Marmitek remote control extinguishes. If the LED does not extinguish, but starts flashing, you need to use method B. (If you have just tried method A and want to try method B, first repeat step 5).

b.Press the button on the existing remote control you want to learn. Keep this button pressed as long as you would when using the original remote control.

7.Repeat steps 5 and 6 for every button you want to learn.

8.When you have finished learning the buttons, press SETUP (9)

Erasing the commands learned per mode to clear memory space You can erase the commands learned and saved for each separate function (TV, VCR, etc.):

1.Keep the SETUP (9) button pressed until one of the Mode LEDs stays lit. Release the SETUP (9) button.

2.Press the Mode button of your choice (TV, VCR, etc.). The LED will flash once.

3.Press the LEARN (3) button twice.

4.Press SETUP (9). The LED will extinguish after a few seconds.

5.All commands learned and saved for the selected function have now been erased.

4.6Setting the standard volume for the satellite receiver

The volume for the SAT mode is controlled via the TV by default. Some satellite decoders have their own volume control. You can program this function in such a way the volume can be controlled directly via the satellite receiver.

1.Press the TV button (2) and release it. The remote control has to be set to TV mode for this procedure.

2.Press SETUP (9) and keep this button pressed until one of the Mode LEDs stays lit.

3.Release SETUP (9).

4.Press ‘ Mute’ (5) and keep this button pressed, The LED will extinguish. Keep the button pressed for about 8 seconds, until the LED starts flashing.

5.The volume can now be controlled via the satellite receiver.

Repeat this procedure if you want to return to normal volume control via the TV.

10

MARMITEK

Page 9 Page 11
Image 10
Page 9 Page 11
Contents ASYCONTREASYCONTROL6 EASYCONTROL6 Safety warnings ContentsInserting batteries Always use NEW AAA-alkaline batteries RED LED indicatorForeword Button functionsProg + SetupMute VOL +Programming Manually entering the codeAutomatically search for common brands CodeAutomatically search for all brands Manually searching for codesLearning codes Master clearSetting the standard volume for the satellite receiver Learning the commandsHome Theatre Macro Function TroubleshootingRemote control does not work or the codes are not stored Programming the Macro buttons M1, M2 and M3Returning the Easycontrol 6 to the original factory settings Inhaltsverzeichnis SicherheitshinweiseEinführung Rote LED-Anzeige Funktionsbeschreibung der TastenEIN/AUS Ton ausNavigationstasten Zahlentasten14 Menü Menü einschalten Exit REW Schnelllauf zurückManuelles Festlegen des Codes ProgrammierenREC Aufnahme Automatisches Suchen einzelner, viel vorkommender Marken Automatischer Markensuchlauf Manuell Codes suchenCodes einlernen Hinweise zum EinlernenStandardvolumen für den Satellitenempfänger einstellen Einlernen von BefehlenHinweis zur Speicherung von Makros Home Theatre Macro FunktionProgrammieren der Makrotasten m1, m2 und m3 Löschen einer MarkotasteProblemlösungen Contenu Avertissements de sécuritéIntroduction Marche/arrêt Fonctions des touchesVoyant lumineux LED Touches de navigation Touches numériquesMenu Affichage du menu REW retour rapideProgrammation manuelle des codes ProgrammationREC Enregistrement Recherche automatique sur quelques marques courantes Recherche automatique des codes de toutes les marques Recherche manuelle des codesEntrée en mémoire des codes Remarques’entrée en mémoire de commandes Programmation des touches macro m1, m2 et m3 Réglage du volume standard pour le récepteur satelliteFonction macro « Home Theatre » Remarques concernant le réglage des macrosEffacer une touche macro Résolution de problèmesRemettre la Easycontrol 6 en réglage usine originel Inhoud VeiligheidswaarschuwingenInleiding Aan/uit Functies van de toetsenRode LED-lampje Navigatieknoppen Numerieke toetsenMenu Menu aan Exit Menu uit 16 OK REW snel terugHandmatig de code ingeven ProgrammerenREC Opname Automatisch zoeken op enkele veelvoorkomende merken Automatisch codes zoeken alle merkenHandmatig codes zoeken Codes LerenHet leren van commando’s Home Theatre Macro Functie Standaardvolume instellen voor de satelliet ontvangerProgrammeren van de macrotoetsen m1, m2 en m3 Opmerking bij het instellen van macro’s Problemen oplossenWissen van een macrotoets Declaration of Conformity Easycontrol Marmitek

20097/130405 specifications

Marmitek 20097/130405 is a highly sought-after device designed to enhance home audio and video experiences. This innovative product is a part of Marmitek's extensive range of multimedia solutions that aim to simplify and elevate how users interact with their electronic devices.

One of the key features of the Marmitek 20097/130405 is its ability to transmit high-quality video and audio signals wirelessly. Utilizing advanced wireless technology, it ensures that users can enjoy seamless streaming without the hassle of tangled cables. This feature is particularly advantageous for those who wish to set up home cinemas or entertainment systems in spaces where running wires may be impractical.

The device supports a broad spectrum of formats, accommodating various sources, including Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that no matter what kind of audio or video source you have, the Marmitek 20097/130405 can integrate effectively into your existing setup.

Equipped with the latest HDMI technology, the Marmitek 20097/130405 supports resolutions up to 4K Ultra HD, allowing for crystal-clear images and vibrant colors. The ability to transmit sound formats such as Dolby Digital and DTS ensures that users can experience immersive audio that complements the stunning visuals.

Another notable characteristic of the Marmitek 20097/130405 is its compact design, which allows for easy placement in any room. It is engineered to blend seamlessly with other entertainment devices, making it an attractive option for modern home environments. The simple setup process ensures that even users who may not be tech-savvy can quickly get started without frustration.

Additionally, the Marmitek 20097/130405 is built for robust performance with minimal latency. This characteristic is crucial for activities that demand real-time audio and video synchronization, such as gaming or interactive presentations.

In conclusion, the Marmitek 20097/130405 stands out as an efficient solution for modern home entertainment systems. With its wireless capabilities, support for high-resolution formats, and user-friendly design, it represents a significant advancement in multimedia technology. Whether for casual viewing or an immersive home theater experience, this device delivers on its promise to enhance the audiovisual interaction within the home.
Top Page Image Contents