Marmitek 20097/130405 Home Theatre Macro Function, Troubleshooting, Clearing a macro button

Page 11

4.7 Home Theatre Macro Function

Your remote control has three Macro buttons: M1, M2 and M3. You can program these buttons to execute a series of commands with one press of a button. This powerful fea- ture is ideal for switching on all your audio and video equipment at once or for selecting certain preferences in Home Theatre applications.

Programming the Macro buttons M1, M2 and M3

1.Keep the SETUP (9) button pressed until one of the Mode LEDs stays lit. Release the SETUP (9) button.

2.Press MACRO (25). The LED will flash once.

3.Press the Macro button you want to set (M1, M2 or M3).

3.Press the buttons on the remote control you want to enter under the Macro button (maximum of 10 commands). The buttons will be executed by the macro in the same order as they are programmed.

4.To save the macro, you press the MACRO button again. If you have used up the maximum of 10 commands, the procedure will stop automatically and the 10 commands will be saved under the Macro button you are setting.

Notes on programming macros

•The first command of a macro always needs to consist of a Mode button (TV, VCR, etc)

•You may have to enter a delay in the macro (e.g. to let your TV warm up). Press PAUSE (23) followed by a numerical key (1-9) to enter a delay of between 1 and 9 seconds. The standard delay between the separate macro commands is half a second.

•The macro buttons can execute both infrared (IR) and radio frequency (RF) commands. This means you can both activate your audio and video equipment and control the lights at the same time (using the Marmitek Home Control TM13). This is ideal for Home Theatre applications. See www.marmitek.com for more information.

Clearing a macro button

1.Press the SETUP (9) button until one of the Mode LEDs stays lit. Release the SETUP button.

2.Press the MACRO (25) button. The LED will flash once.

3.Press the macro button you want to clear (M1, M2 or M3).

4.Press the SETUP (25) button again.

5.Troubleshooting

The remote control does not work or the codes are not stored.

•Check whether you have pressed the right Mode button for the device you want to control.

•If the code does not work, you can try AutoSearch or enter the next code for your brand.

•Check whether the batteries have been placed correctly.

•To program the remote control you need two (new) AAA-alkaline batteries.

•If the remote control has lost the code, you may have to replace the batteries.

•If the LED stays lit, you need to replace the batteries.

•Restore the remote control to its factory settings.

•On www.marmitek.com you will find a list of FAQ’s.

ENGLISH

EASYCONTROL 6

11

Page 10 Page 12
Image 11
Page 10 Page 12
Contents ASYCONTREASYCONTROL6 EASYCONTROL6 Contents Safety warningsButton functions RED LED indicatorForeword Inserting batteries Always use NEW AAA-alkaline batteriesVOL + SetupMute Prog +Manually entering the code ProgrammingCode Automatically search for common brandsManually searching for codes Automatically search for all brandsMaster clear Learning codesLearning the commands Setting the standard volume for the satellite receiverProgramming the Macro buttons M1, M2 and M3 TroubleshootingRemote control does not work or the codes are not stored Home Theatre Macro FunctionReturning the Easycontrol 6 to the original factory settings Einführung SicherheitshinweiseInhaltsverzeichnis Ton aus Funktionsbeschreibung der TastenEIN/AUS Rote LED-AnzeigeREW Schnelllauf zurück Zahlentasten14 Menü Menü einschalten Exit NavigationstastenREC Aufnahme ProgrammierenManuelles Festlegen des Codes Automatisches Suchen einzelner, viel vorkommender Marken Manuell Codes suchen Automatischer MarkensuchlaufHinweise zum Einlernen Codes einlernenEinlernen von Befehlen Standardvolumen für den Satellitenempfänger einstellenLöschen einer Markotaste Home Theatre Macro FunktionProgrammieren der Makrotasten m1, m2 und m3 Hinweis zur Speicherung von MakrosProblemlösungen Introduction Avertissements de sécuritéContenu Voyant lumineux LED Fonctions des touchesMarche/arrêt REW retour rapide Touches numériquesMenu Affichage du menu Touches de navigationREC Enregistrement ProgrammationProgrammation manuelle des codes Recherche automatique sur quelques marques courantes Recherche manuelle des codes Recherche automatique des codes de toutes les marquesRemarques Entrée en mémoire des codes’entrée en mémoire de commandes Remarques concernant le réglage des macros Réglage du volume standard pour le récepteur satelliteFonction macro « Home Theatre » Programmation des touches macro m1, m2 et m3Remettre la Easycontrol 6 en réglage usine originel Résolution de problèmesEffacer une touche macro Inleiding VeiligheidswaarschuwingenInhoud Rode LED-lampje Functies van de toetsenAan/uit REW snel terug Numerieke toetsenMenu Menu aan Exit Menu uit 16 OK NavigatieknoppenREC Opname ProgrammerenHandmatig de code ingeven Automatisch codes zoeken alle merken Automatisch zoeken op enkele veelvoorkomende merkenCodes Leren Handmatig codes zoekenHet leren van commando’s Programmeren van de macrotoetsen m1, m2 en m3 Standaardvolume instellen voor de satelliet ontvangerHome Theatre Macro Functie Wissen van een macrotoets Problemen oplossenOpmerking bij het instellen van macro’s Declaration of Conformity Easycontrol Marmitek

20097/130405 specifications

Marmitek 20097/130405 is a highly sought-after device designed to enhance home audio and video experiences. This innovative product is a part of Marmitek's extensive range of multimedia solutions that aim to simplify and elevate how users interact with their electronic devices.

One of the key features of the Marmitek 20097/130405 is its ability to transmit high-quality video and audio signals wirelessly. Utilizing advanced wireless technology, it ensures that users can enjoy seamless streaming without the hassle of tangled cables. This feature is particularly advantageous for those who wish to set up home cinemas or entertainment systems in spaces where running wires may be impractical.

The device supports a broad spectrum of formats, accommodating various sources, including Blu-ray players, gaming consoles, and streaming devices. This versatility ensures that no matter what kind of audio or video source you have, the Marmitek 20097/130405 can integrate effectively into your existing setup.

Equipped with the latest HDMI technology, the Marmitek 20097/130405 supports resolutions up to 4K Ultra HD, allowing for crystal-clear images and vibrant colors. The ability to transmit sound formats such as Dolby Digital and DTS ensures that users can experience immersive audio that complements the stunning visuals.

Another notable characteristic of the Marmitek 20097/130405 is its compact design, which allows for easy placement in any room. It is engineered to blend seamlessly with other entertainment devices, making it an attractive option for modern home environments. The simple setup process ensures that even users who may not be tech-savvy can quickly get started without frustration.

Additionally, the Marmitek 20097/130405 is built for robust performance with minimal latency. This characteristic is crucial for activities that demand real-time audio and video synchronization, such as gaming or interactive presentations.

In conclusion, the Marmitek 20097/130405 stands out as an efficient solution for modern home entertainment systems. With its wireless capabilities, support for high-resolution formats, and user-friendly design, it represents a significant advancement in multimedia technology. Whether for casual viewing or an immersive home theater experience, this device delivers on its promise to enhance the audiovisual interaction within the home.
Top Page Image Contents