54ENSPECIALFEATURES(cont.)
A/B
POWER
1 2 3
NUMBER "1" | 5 | 6 |
4 |
7 | 8 | 9 | NUMBER |
| |||
| 0 |
| "2" |
1 3 Á
¦ 7 8
4 | ¢ |
STOP |
|
Control Two JVC VCRs
The remote control is capable of controlling two JVC VCRs independently; one set to respond to your remote control's A code control signals and another set to respond to B code control signals. The remote control is preset to send A code signals because your VCR is initially set to respond to A code signals. You can easily modify your VCR to respond to B code signals.
|
| UNPLUG VCR'S POWER |
1 |
| CORD |
| Unplug from the AC outlet. | |
|
| SET REMOTE CONTROL |
2 |
| CODE |
| While holding down A/B on the remote control, press | |
| the NUMBER key "2" and then press STOP. | |
3 |
| PLUG IN POWER CORD |
| Plug back in to the AC outlet. | |
4 |
| TURN VCR POWER ON |
| Press POWER on the remote. |
The VCR will now respond only to
To set the VCR to respond to A code signals again, repeat the above procedures setting the A/B CODE switch to A, instead of B, in step 2.
You can control two VCRs with the same remote control by switching the remote's code between A and B.