JVC HR-A60U manual Editing, Separate Audio Program SAP, Listening to SAP

– Other Functions –

SEPARATE AUDIO PROGRAM (SAP)

Your VCR is fitted with an SAP broadcast system which enables you to switch to a SEPARATE AUDIO PROGRAM when viewing a selected channel.

This function applies only when the program is broadcast in multi-languages through the SAP broadcast system.

When a TV is connected with an audio/video cable, turn the TV and this VCR on, and select the video input mode the TV.

	Press MENU on the Remote.			AUTOTIMERMENUREEATRECSET		ONOFF
1
	Press SET –/+ to select “SAP”			AP
				CHSETUP
	option.	·	+/SYSTEM-/ENTER/MENUSETUPÒ			ONOFF
2	Press ENTER to select “ON”
				CHAUTOTIMERAPSETUPREEATRECSET
	position.
3
		·			Ò
	Press MENU to return to
	normal screen.

LISTENING TO SAP

When the VCR is turned on or a channel selection is made, make certain "SAP" appears on the screen for about 4 seconds.

This means that the "Separate Audio Program" broadcasting is available.

STEREO SAP OR SAP

You can set the Daylight saving time automatically or manually.

DAYLIGHT SAVING TIME SETTINGAUTOTIMERAPMENUSETUPREEATRECSETONOFF

1 Press MENU. Press SET –/+ to select					CH
	“SYSTEM SETUP” option, then press				SYSTEMSETUP
	ENTER.				NONOISETUPBACKGROUND
2	Press SET –/+ to select “DAYLIGHT
	MENU until the MENU screen is
	SAVING TIME” option, then press		·+/-/ENTER/MENUÒ
	cleared.				AUTOCLOCK	ONOFF
	ENTER.				STANDARDTIME
	ON:	for manual setting	S
3	Press SET –/+ to select one of the			YSTEMCLOCK
		(forward one hour)	·	+/-/ENTER/MENUÒ
	options, then press ENTER. Press				LANGUAGE/IDIOMA/LAGUE
	OFF:	for manual setting
		(back one hour)
	AUTO: for automatic setting
		(read XDS in the signal)

When you want to set the Daylight Saving Time manually, on the first Sunday in April you set to “ON”, and on the last Sunday in October you set to “OFF”.

NOTES: • When shipped from factory, the DAYLIGHT SAVING TIME option is set to AUTO position.

•When the clock is not set, Daylight Saving Time setting is not available.

•When there is no Daylight Saving Time in your area, al- ways select OFF position in step 3.

JVC TV Remote Control

This Remote can control some functions (TV POWER, INPUT, TV CH –/+ and TV VOL –/+) of a remote controllable JVC TV without setting.

NOTE:

•It’s not possible to operate a unit not equipped with a remote sensor.

•This Remote can control a JVC TV only.

Editing

You can use your VCR as the playback or recording VCR. You can use a camcorder as the playback VCR and your VCR as the recording VCR. Refer also to the other components’ instruction manuals for connection and its operations.

1Make connections

Example: When using this VCR as the playback VCR

This VCR (for playback)

To audio/video out

Audio/video cable (not supplied)

To audio/video input

Another VCR (for recording)

•When using this VCR as the recording VCR, connect this VCR’s audio/video input connectors to the audio/video output connectors on the other VCR. If the playback VCR is monaural, connect the audio output connector on the playback VCR to the left audio input connector on this VCR.

2Load cassettes

Insert the playback cassette into the playback VCR and the cassette to be recorded on into the recording VCR.

3Select input mode on recording VCR

Select the correct external input on the recording VCR. On this VCR (when using this VCR as the recording VCR); Select “L” — when connecting the other VCR to the audio/video input connectors on the front panel.

Press O (AUX) or CH–/+ on the Remote [CH–/+ on the VCR].

4Start playback

Press PLAY () on the playback VCR.

5Start recording

Press REC on the recording VCR.