JVC HR-A60U manual Tuner Setting, Manual Clock Setting, TV/CATV Selection

– Initial Settings –

4Press SET –/+ to select your time zone, then press

ENTER.

ATLANTIC	:	GMT – 4	hours
		(GMT: Greenwich Mean Time)
EASTERN	:	GMT – 5	hours
CENTRAL	:	GMT – 6	hours
MOUNTAIN	:	GMT – 7	hours
PACIFIC	:	GMT – 8	hours
ALASKA	:	GMT – 9	hours
HAWAII	:	GMT – 10 hours
AUTO	:	AUTO SET

Tuner Setting

This VCR is equipped with a channel memory feature which allows channels to skip up or down to the next channel set into memory, skipping over unwanted channels. Before selecting channels, they must be programmed into the VCR’s memory. In addition to normal VHF and UHF channels, this VCR can receive up to 113 Cable TV channels. To use this VCR with an antenna, set the TV/CATV menu option to the TV mode. When shipped from the factory, this menu option is in the CATV mode.

5Press MENU twice to return to the normal screen.

NOTES: • To be able to select the standard time, the clock

		must first be set by “AUTO CLOCK” once.
		• If you live in Newfoundland and the Auto Clock
		does not function properly, set the AUTO CLOCK
		menu option to OFF and set the clock manually.
Manual Clock Setting					TIMERMENURECSET
		Access Menu screen
	1				AUTOAPREEATONOFF
Press MENU on the Remote. Press					CHSETUP
SET –/+ to select “SYSTEM SETUP”,					SYSTEMSETUP
then press ENTER.			·+/-/ENTER/MENUÒ
		Access Clock Set screen	SYSTEM
	2				CLOCK
					LANGUAGE/IDIOMA/LAGUE
Press SET –/+ to select “CLOCK SET”,					NONOISETUPBACKGROUND
then press ENTER.					AUTOCLOCKONOFF
					STANDARDTIME
			·
				+/DAYLIGHT-/ENTER/MENUSAVINGÒTIME

–TV/CATV Selection

1Access Menu screen, then CH Setup screen

Press MENU on the Remote. Press SET –/+ to select “CH SETUP”, then press ENTER.

2Perform TV/CATV Selection

Press SET –/+ to select “TV/CATV”, then press ENTER to select the TV or CATV mode. The arrow indicates the selected mode.

TV	- VHF/UHF channels
CATV	- CABLE TV channels

SYSTEMCHAUTOTIMERAPMENUSETUPREEATRECSETONOFF

·+/–/ENTER/MENUSETUPÒ

CH SETUP

TV CATV

AUTO CH MEMORY

ADD/DELETE

3	Set month, day, year and time	MONTHDAYTIMEYEAR	12203103:0(SAT)0AM
Press SET –/+ until the desired month		·+/-MONTH/ENTER/CANCEL/MENU3Ò
appears, then press ENTER. Set the
day, year and time in the same way.
4	Start clock
		DAY		2	6(WED)
Press MENU to return to normal
		YEAR	200		30AM
screen.		TIME		8:
		·+//ENTER/CAN-		CEL/MENUÒ

Press MENU twice to return to normal screen.

Setting channels automatically
– Auto Channel Memory			CHSETUP
The VCR can receive a maximum of		·+/–/ENTER/MENUÒ
	Setup screen
181 channels by presetting the			AUTOTIMERMENUREEATRECSET	ONOFF
channels into memory.			AP
			SYSTEMSETUP
	Access Menu screen, then CH
1

Press MENU on the Remote. Press

SET –/+ to select “CH SETUP”, then

press ENTER. CH SETUP

To make corrections any time during the process

Press CANCEL repeatedly until the item you want to change blinks, then press SET –/+.

NOTE:

After a power failure or disconnection of the power, the timer settings will be lost. In this case, reset the present time.

2Perform Auto Channel Memory

Press SET –/+ to select “AUTO CH MEMORY”, then press ENTER.

3Complete Auto Channel Memory

The auto tuning will start. The channel display will count up and when finished, the screen returns to normal.

TV CATV
AUTO CH MEMORY	CH001
ADD/DELETE