JVC HR - S7950EU specifications 24 EN

Page 24

24 EN

RECORDING

Basic Recording

Turn on the TV and select the video channel (or AV mode).

Recording Resume Function

If there is a power outage during recording, Instant Timer Recording ( pg. 25) or timer recording ( pg. 28, 30, 32), the recording will resume automatically when power is restored to the recorder unless the recorder’s memory backup has expired.

NOTE:

If a power outage exceed the recorder’s memory backup time, Recording Resume Function does not work.

A Load a cassette.

Insert a cassette with the record safety tab intact.

●The recorder checks the tape information for Programme Navigation. For details, refer to “Navigation” ( pg. 36).

B Choose a programme.

Press PR +/– or the number keys. Or push the JOG dial and turn it to the left or right to select the channel you wish to record.

C Set the tape speed.

Press SP/LP/EP (p). The current setting appears on the front display panel or TV screen. Press SP/LP/EP (p) again to change the setting while the tape speed is displayed on the TV screen.

●In EP mode, the recording time is extended three times.

●If you record a programme in EP mode on this recorder, it is recommended to play back the EP-recorded tape on this recorder.

●It is not possible to select EP mode if “COLOUR SYSTEM” is set to “MESECAM”. ( pg. 52)

D Start recording.

Press and hold 7 and press 4 on the remote control, or press 7 on the recorder.

●If “O.S.D.” is set to “ON” ( pg. 49), “MARK” blinks on the screen while an index code is being marked.

●When “DIRECT REC” is set to “ON” ( 50), if you press any button just after pressing 7 on the recorder (or 7 and 4 on the remote control), the recorder may not function properly.

B.E.S.T. takes place at the beginning of both the first SP and the first LP (or EP) recording after inserting the cassette. ( pg. 27)

If “DIRECT REC” is set to “ON”, the programme that appears on the TV screen will be recorded ( pg. 50).

E Pause/Resume recording.

Press 9. Press 4 to resume recording.

●You can select channel during the Record Pause mode.

F Stop recording.

Press 8 on the remote control or 0 on the recorder. Then press 0 to remove the cassette.

Accidental erasure prevention

To prevent accidental recording on a recorded cassette, remove its safety tab. To record on it later, cover the hole with adhesive tape.

Record safety tab

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Connector cover Front ViewRear View Front Display Panel ON-SCREEN Display Remote Control How To Use Operating JVC TVsCheck the contents 10 ENSituate the recorder Connect the recorder to TVTo connect to a TV with S-VIDEO/AUDIO in connectors Video ConnectionAuto Set Up 12 ENTurn on the recorder Select your countryPerform Auto Set Up Select the languageConfirm/Set video channel On the front display panelPerform Preset Download 14 ENSet the video channel Press rt to select CH - and press OK or eLanguage for the on-screen display Just ClockAccess the Main Menu screen Access the Country Set screenLanguage 16 ENInstalling Satellite Controller Situate the Satellite ControllerAttach the Satellite Controller Make connectionsSetting satellite receivers brand and channel 18 ENTV Auto Power On NexTView LinkVCR Auto Standby Direct Rec Basic Playback 20 ENSlow Motion High-Speed Turbo SearchPause during playback Activate frame-by-frame playback22 EN Variable Speed SearchIndex Search Skip SearchNext Function Memory Repeat PlaybackManual Tracking Soundtrack Selection24 EN Instant Timer Recording ITR Tape Remaining TimeEngage the S-VHS ET mode 26 ENSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesPlayback RecordingAccess the Showview screen Access the Showview Program screenBefore performing the Showview Timer Programming 28 ENSet the VPS/PDC mode Access the Title Edit screenEngage the recorder’s timer mode Enter the programme titleExpress Timer Programming 30 ENTo Timer-Record Weekly Or Daily Serials VPS/PDC RecordingEnter the channel position Press PR+Enter the programme mode Before performing the 24 Hour Express Timer Programming32 EN Set the programme start/stop time and channelDisengage the timer mode Cancel or change a programmeReturn to the timer mode Access the Programme Check screen/displayCancel or change programme setting Confirm the overlapping programmesSelect the programme to modify Overlapping programmes blink on the TV screenSelect the L-2 Select mode Recording modeProgramme Recording Before performing the following stepsNavigation 36 ENNavigation Playback Programme Navigation ScreenLoad a recorded cassette Select a programme38 EN Edit Programme TitleSelect the programme Entering Character Delete Tape DataDelete the tape data Example Enter JVC NewsEdit From a Camcorder 40 ENSet the input mode of recording deck Another Video RecorderAdvantages of S-VHS video recorders Start the source playerOutput/Input Set Select and L-2 Input Setting Decoder connectorConnecting To a Satellite Receiver Simple ConnectionsPerfect Connections Select the input mode 46 ENConnect the decoder Set the tunerConnecting/Using a Stereo System Make connectionsMode Set Access the Mode Set screenSelect the mode Select the mode settingUsing this video recorder as the source player for editing Recorder is powered back onWith old tapes and rental cassettes Clear picture reproduction is also linked to this functionOn the remote control, or press 7 on the recorder Entire programme while timer-recording in SP mode50 EN Function  pg , set PROG. Navigation to OFFCorrection to the luminance signal to enhance detail Indicator lights up on the front display panelS-VHS recording mode is selected Mode setting52 EN Colour SystemShowview System Setup Guide Program Number SetGuide Program Number Enter the Guide Program numberAccess the Auto Channel Set screen Tuner Set54 EN Auto Channel SetPerform Auto Channel Set View the Confirmation screenPress OK twice 56 EN Manual Channel SetWhen Receiving a Scrambled Broadcast Delete a Channel58 EN Set Stations aSet Stations B TV Station And ID List Station NameAccess the Clock Set screen Clock Set60 EN Set the date and time Set Just ClockSet the source channel position for clock data Start the clock operationAccess the Video Channel Set mode Exit the Video Channel Set modeVideo Channel Set 62 ENPower 64 EN RecordingOther Problems 66 EN PlaybackSignal-to-noise ratio 45 dB Horizontal resolution Memory backup time Approx minScan system Lines VHS68 EN Memo 70 EN

HR - S7950EU specifications

The JVC HR-S7950EU is a notable addition to the VCR market, known for its advanced technologies and user-friendly features that redefine the home video experience. Designed for enthusiasts of analog video recording and playback, this model showcases JVC's commitment to delivering high-quality performance in a compact format.

One of the standout features of the HR-S7950EU is its Super VHS capability. This innovative technology allows for superior image quality compared to standard VHS, providing a clearer and more vibrant picture. The Super VHS format boasts enhanced resolution, which is particularly beneficial for recording high-detail content. It is an ideal choice for those looking to preserve their home videos with an enhanced level of detail.

Another significant characteristic of the HR-S7950EU is its dual-head system, which optimizes playback and recording quality. This dual-head design minimizes tape wear and enhances the clarity of the video, ensuring that each playback is as good as the last. Furthermore, the unit incorporates a high-quality video processing circuit that improves color reproduction and reduces noise, leading to a more immersive viewing experience.

In addition to its video processing capabilities, the HR-S7950EU is equipped with various convenient features, including a built-in timer for scheduled recordings. This allows users to tape their favorite shows or events without the need for manual operation, showcasing JVC's commitment to user convenience. The unit also includes options for edited playback, enabling users to create customized viewing experiences by skipping unwanted content.

The JVC HR-S7950EU supports a wide range of tape formats, making it compatible with both standard VHS and Super VHS tapes, ensuring versatility for users with diverse collections. The model also prides itself on its sleek design and user-friendly interface, making navigation straightforward even for those less familiar with technology.

Connectivity options on the HR-S7950EU are robust, featuring multiple AV inputs and outputs to accommodate various devices. The inclusion of S-Video outputs further enhances the video quality for connecting to televisions and projectors, allowing users to enjoy their recordings with minimal signal loss.

In summary, the JVC HR-S7950EU offers a blend of advanced features and user-centric designs that firmly establish it as a valuable choice for home video recording and playback. Whether one is looking to preserve memories on tape or enjoy classic films, this VCR delivers performance and quality that resonate with video enthusiasts. Its combination of Super VHS capabilities, dual-head recording technology, and user-friendly features makes it an excellent choice in the realm of analog video technology.
Top Page Image Contents