JVC HR - S7950EU With old tapes and rental cassettes, Playing back a tape recorded on a camcorder

Page 49

 

 

EN 49

 

 

* The default setting is bold in the table below.

 

 

8 DIGITAL TBC/NR

Your recorder is equipped with the Digital TBC (Time Base Corrector) that

ON

removes jitter from fluctuating video signals to deliver a stable picture even

OFF

with old tapes and rental cassettes.

 

The on/off of Digital 3-DNR (Noise Reduction) which cuts noise and enables

 

clear picture reproduction is also linked to this function.

 

We recommend that you set “DIGITAL TBC/NR” to “ON” when...

 

... playing back a tape recorded on a camcorder.

 

... playing back a tape repeatedly used.

 

... using this video recorder as the source player for editing.

 

NOTES:

 

 

● If you play back a tape recorded under poor TV reception condition, the picture may

 

become more stable with Digital TBC/NR set to off.

 

● When “DIGITAL TBC/NR” is set to “ON”, if you play back a tape where certain types

 

of signals are recorded (using a PC or some character generators), the playback

 

picture may be distorted. If this is the case, set “DIGITAL TBC/NR” to “OFF”.

 

● When playing back a MESECAM tape, Digital TBC/NR does not function even

 

though “DIGITAL TBC/NR” is set to “ON”.

 

 

8 B.E.S.T.

You can set the B.E.S.T. (Biconditional Equalised Signal Tracking) system to

ON

“ON” or “OFF” ( pg. 27).

OFF

 

 

 

 

8 PICTURE CONTROL

This feature helps you to adjust the playback picture quality according to

AUTO

your preference. Normally select “AUTO”.

EDIT

AUTO:

Provides the optimised picture benefits of the B.E.S.T. Picture

SOFT

EDIT:

System.

SHARP

Minimizes picture degradation during editing (recording and

 

SOFT:

playback).

 

Reduces image coarseness when viewing overplayed tapes

 

SHARP:

containing a lot of noise.

 

Clearer, sharper-edged picture when viewing images with lots of

 

 

flat, same-coloured surfaces such as cartoons.

 

NOTES:

 

 

● When you select “EDIT”, “SOFT” or “SHARP”, the selected mode will not change

 

until you select another mode.

 

● When you select “EDIT” to dub tapes, be sure to select “AUTO” after you finish

 

dubbing the tapes.

 

● When “B.E.S.T.” is “OFF”, “PICTURE CONTROL” switches automatically from

 

“AUTO” to “NORM”.

 

 

8 AUTO TIMER

When this function is set to “ON”, the timer is automatically engaged when

ON

the recorder power is turned off, and automatically disengaged when the

OFF

recorder is powered back on.

 

NOTE:

 

 

For safety, when “AUTO TIMER” is set to “OFF”, all other recorder functions are

 

disabled while the Timer mode is engaged. To disengage the timer, press # (TIMER).

 

 

8 O.S.D.

When this function is set to “ON”, various operational indicators appear on

ON

the TV screen. Messages appear in the selected language ( pg. 15, 16).

OFF

NOTES:

 

 

 

 

● When you use this recorder as the source player for editing, be sure to set “O.S.D.”

 

to “OFF” before starting.

 

● During playback, the operation mode indicators may be disturbed depending on the

 

type of tape being used.

 

 

 

Page 48 Page 50
Image 49
Page 48 Page 50
Contents Video Cassette Recorder Safety Precautions Moisture Condensation Front View Connector coverRear View Front Display Panel ON-SCREEN Display Remote Control Operating JVC TVs How To Use10 EN Check the contentsSituate the recorder Connect the recorder to TVVideo Connection To connect to a TV with S-VIDEO/AUDIO in connectors12 EN Auto Set UpTurn on the recorder Select your countrySelect the language Perform Auto Set UpConfirm/Set video channel On the front display panel14 EN Perform Preset DownloadSet the video channel Press rt to select CH - and press OK or eJust Clock Language for the on-screen displayAccess the Country Set screen Access the Main Menu screenLanguage 16 ENSituate the Satellite Controller Installing Satellite ControllerAttach the Satellite Controller Make connections18 EN Setting satellite receivers brand and channelNexTView Link TV Auto Power OnVCR Auto Standby Direct Rec 20 EN Basic PlaybackHigh-Speed Turbo Search Slow MotionPause during playback Activate frame-by-frame playbackVariable Speed Search 22 ENIndex Search Skip SearchRepeat Playback Next Function MemoryManual Tracking Soundtrack Selection24 EN Tape Remaining Time Instant Timer Recording ITR26 EN Engage the S-VHS ET modeSuper VHS ET S-VHS ET Receiving Stereo and Bilingual ProgrammesRecording PlaybackAccess the Showview Program screen Access the Showview screenBefore performing the Showview Timer Programming 28 ENAccess the Title Edit screen Set the VPS/PDC modeEngage the recorder’s timer mode Enter the programme title30 EN Express Timer ProgrammingVPS/PDC Recording To Timer-Record Weekly Or Daily SerialsEnter the channel position Press PR+Before performing the 24 Hour Express Timer Programming Enter the programme mode32 EN Set the programme start/stop time and channelCancel or change a programme Disengage the timer modeReturn to the timer mode Access the Programme Check screen/displayConfirm the overlapping programmes Cancel or change programme settingSelect the programme to modify Overlapping programmes blink on the TV screenRecording mode Select the L-2 Select modeProgramme Recording Before performing the following steps36 EN NavigationProgramme Navigation Screen Navigation PlaybackLoad a recorded cassette Select a programmeEdit Programme Title 38 ENSelect the programme Delete Tape Data Entering CharacterDelete the tape data Example Enter JVC News40 EN Edit From a CamcorderAnother Video Recorder Set the input mode of recording deckAdvantages of S-VHS video recorders Start the source playerOutput/Input Set Decoder connector Select and L-2 Input SettingSimple Connections Connecting To a Satellite ReceiverPerfect Connections 46 EN Select the input modeConnect the decoder Set the tunerMake connections Connecting/Using a Stereo SystemAccess the Mode Set screen Mode SetSelect the mode Select the mode settingRecorder is powered back on Using this video recorder as the source player for editingWith old tapes and rental cassettes Clear picture reproduction is also linked to this functionEntire programme while timer-recording in SP mode On the remote control, or press 7 on the recorder50 EN Function  pg , set PROG. Navigation to OFFIndicator lights up on the front display panel Correction to the luminance signal to enhance detailS-VHS recording mode is selected Mode settingColour System 52 ENGuide Program Number Set Showview System SetupGuide Program Number Enter the Guide Program numberTuner Set Access the Auto Channel Set screen54 EN Auto Channel SetView the Confirmation screen Perform Auto Channel SetPress OK twice Manual Channel Set 56 ENDelete a Channel When Receiving a Scrambled BroadcastSet Stations a 58 ENSet Stations B Station Name TV Station And ID ListClock Set Access the Clock Set screen60 EN Set Just Clock Set the date and timeSet the source channel position for clock data Start the clock operationExit the Video Channel Set mode Access the Video Channel Set modeVideo Channel Set 62 ENPower Recording 64 ENOther Problems Playback 66 ENMemory backup time Approx min Signal-to-noise ratio 45 dB Horizontal resolutionScan system Lines VHS68 EN Memo 70 EN

HR - S7950EU specifications

The JVC HR-S7950EU is a notable addition to the VCR market, known for its advanced technologies and user-friendly features that redefine the home video experience. Designed for enthusiasts of analog video recording and playback, this model showcases JVC's commitment to delivering high-quality performance in a compact format.

One of the standout features of the HR-S7950EU is its Super VHS capability. This innovative technology allows for superior image quality compared to standard VHS, providing a clearer and more vibrant picture. The Super VHS format boasts enhanced resolution, which is particularly beneficial for recording high-detail content. It is an ideal choice for those looking to preserve their home videos with an enhanced level of detail.

Another significant characteristic of the HR-S7950EU is its dual-head system, which optimizes playback and recording quality. This dual-head design minimizes tape wear and enhances the clarity of the video, ensuring that each playback is as good as the last. Furthermore, the unit incorporates a high-quality video processing circuit that improves color reproduction and reduces noise, leading to a more immersive viewing experience.

In addition to its video processing capabilities, the HR-S7950EU is equipped with various convenient features, including a built-in timer for scheduled recordings. This allows users to tape their favorite shows or events without the need for manual operation, showcasing JVC's commitment to user convenience. The unit also includes options for edited playback, enabling users to create customized viewing experiences by skipping unwanted content.

The JVC HR-S7950EU supports a wide range of tape formats, making it compatible with both standard VHS and Super VHS tapes, ensuring versatility for users with diverse collections. The model also prides itself on its sleek design and user-friendly interface, making navigation straightforward even for those less familiar with technology.

Connectivity options on the HR-S7950EU are robust, featuring multiple AV inputs and outputs to accommodate various devices. The inclusion of S-Video outputs further enhances the video quality for connecting to televisions and projectors, allowing users to enjoy their recordings with minimal signal loss.

In summary, the JVC HR-S7950EU offers a blend of advanced features and user-centric designs that firmly establish it as a valuable choice for home video recording and playback. Whether one is looking to preserve memories on tape or enjoy classic films, this VCR delivers performance and quality that resonate with video enthusiasts. Its combination of Super VHS capabilities, dual-head recording technology, and user-friendly features makes it an excellent choice in the realm of analog video technology.
Top Page Image Contents