24
TIMER
RECORDING
On-Screen
Timer
Programming
Turn on the TV and select the VCR channel 3 or 4 (or AV mode).
2 
3
q 5/8 6
MENU | OK |
| 1 | 2 |
| 3 |
|
| 4 | 5 |
| 6 | NUMBER |
|
|
|
|
| |
| 7 | 8 | 9 |
| NUMBER "9" |
NUMBER "8" |
|
|
|
| |
| 0 |
|
|
| |
|
|
|
|
| |
|
|
|
|
| MENU |
CH |
|
|
|
| OK |
1 | 3 |
|
| Á |
|
¦ | 7 |
| 8 |
|
|
You can directly program the VCR’s timer to record up to 8 shows, as far as a year in advance. Remember, the clock must be set before you can program the timer (☞ pg. 8).
1 |
| LOAD A CASSETTE |
| |
| Make sure the record safety tab is intact. If not, cover | |||
| the hole with adhesive tape, then load. |
| ||
|
| |||
| ● The VCR comes on, and the counter is reset, | |||
|
| automatically. |
|
|
|
|
| ||
|
| ACCESS | ||
|
| MENU |
|
|
2 Press MENU. |
|
| ||
|
| ACCESS PROGRAM SET | ||
|
| SCREEN |
|
|
|
| Make sure the arrow is next to "PROGRAM SET", then | ||
3 press OK. |
|
| ||
|
| SELECT PROGRAM NUMBER | ||
|
| Press the appropriate | PROGRAM 1 | |
|
| NUMBER keys or CH5°to | ||
|
|
|
| |
|
| select a vacant program | DATE | – |
4 number, then press OK. The | START | – | ||
|
| first time you set the timer | STOP | – |
|
| programming function, all | CHANNEL | – – SP |
|
|
|
| |
|
| the program numbers will | PRESS NUMBER KEY | |
|
| be blank; in this case just | OR (5,°), THEN (OK) | |
|
| press OK when the Program | PRESS (MENU) TO END | |
|
|
|
| |
|
| Set screen appears. |
|
|
|
|
|
|
|
|
| SET PROGRAM |
|
|
5 |
| INFORMATION |
|
|
| Press the appropriate NUMBER keys to set the date, | |||
start/stop time and channel number. Press CH5° to set | ||||
AM/PM and tape speed (SP or EP). Press OK after AM/ | ||||
| PM, channel number and tape speed settings. | |||
●Any information comprised of 1 digit (except the channel number) should have a "0" entered before it.
●It is possible to set all information using the CH5° button.
(In this case, press OK after each setting.) Do not use the CH ° button to set the date.
●At the Program Set screen, the setting that can be set blinks.
NOTE:
If you are using a cable box, enter the cable box channel, not the channel to be recorded. The channel to be recorded must be selected on the cable box. (The cable box channel is the VCR's channel that displays the channels received by the cable box.)
**You can record selected programs at the same time every weekday, or once a week. Before entering the month, press NUMBER key “8” (DAILY) or “9” (WEEKLY). Either "DAILY" or "WEEKLY" appears. Press again and "DAILY" or "WEEKLY" disappears. For weekly recording, the desired date for the day of the week must be entered.