FF
EW
2 
3
q 5/8 6
CH
| 1 | 2 | 3 |
|
| 4 | 5 | 6 |
|
| 7 | 8 | 9 |
|
|
| 0 |
|
|
CH |
|
|
|
|
1 | 3 |
| Á | FF |
REW | 7 |
| 8 |
|
¦ |
|
|
SEARCH
15
Manual Tracking
Once playback begins, the VCR’s automatic tracking function is engaged. If noise appears in the picture, you can override this and make the adjustment manually.
ENGAGE MANUAL
TRACKING MODE
1 During playback, press the CH5 and ° buttons on the
VCR's front panel simultaneously to cancel the automatic tracking mode and enable manual tracking adjust.
ADJUST MANUAL
TRACKING
2 Press CH5 or ° on the VCR's front panel or remote. Press briefly for fine adjust, or press and hold for coarse adjust. Watch the screen and continue adjusting until optimum picture and sound quality are achieved.
RE-ENGAGE AUTOMATIC
TRACKING
3 Press the CH5and ° buttons on the VCR's front panel simultaneously.
●When automatic tracking is
NOTES:
●To obtain a noiseless still picture it may be necessary to adjust tracking in slow playback and then engage Pause.
●Manual tracking is possible during
Index Search
Index codes are placed on the tape at the start of each recording. You can find and automatically play back from the start of any recording using the Index Search function.
1 |
| START SEARCH |
| While the tape is stopped, press SEARCH Tor Y. | |
|
| |
| ACCESS DISTANT CODE | |
2 |
| To access a recording |
| SEARCH Tor Yrepeatedly until the correct | |
number is displayed on screen (only if SUPERIMPOSE | ||
| is set to ON (☞ pg. 17). Playback begins automatically | |
|
| when the desired recording is located. |
|
|
|
|
| ● If necessary press REW or FF when play starts to |
|
| search visually to find the very beginning of the |
|
| desired program. |
NOTE:
An index code is not placed on the tape when recording is paused and then resumed.