Magnavox ZV427MG9 Maintenance Servicing, Cleaning the cabinet, Cleaning discs, Auto head cleaning

Page 7

PRECAUTIONS

Maintenance

Servicing

•Please refer to relevant topics on “TROUBLESHOOTING” on pages 81-84 before returning the product.

•If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center.

Cleaning the cabinet

•Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive.

Cleaning discs

•When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion.

•Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records.

Cleaning the disc lens

•If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit.

Disc handling

•Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs.

•Always store the disc in its protective case when it is not used.

Auto head cleaning

•Automatically cleans video heads as you insert or remove a cassette, so you can see a clear picture.

•Playback picture may become blurred or interrupted while the TV program reception is clear. Dirt accumulated on the video heads after a long period of use, or the usage of rental or worn tapes can cause this problem. If a streaky or snowy picture appears during playback, the video heads in your unit may need to be cleaned.

1.Please visit your local Audio/Video store and purchase a good quality VHS video head cleaner.

2.If a video head cleaner does not solve the problem, please consult your dealer or an Authorized Service Center.

© 2008 Funai Electric Co., Ltd.

Note

•Remember to read the instructions along with the video head cleaner before use.

•Clean video heads only when problems occur.

IR signal check

If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction.

•With an AM radio:

Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working.

• With a digital camera (including built-in camera of cellular phone):

Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

Dolby Digital Recording

“Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allow- ing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs.

HDMI, the HDMI logo and High- Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.

Introduction Connections Basic Setup Recording Playback Editing Function Setup VCR Functions

All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited.

Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes.

with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law.

EN 5

Others

Español

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ZV427MG9 Press Setup to exit Plug in the power cords of the devices to the AC outletConnect, then press OK 6Press Stop C to stop recording 3Press REC Mode to select a recording modeLaser Safety PrecautionsMake your contribution to the environment Precautions Important SafeguardsMoisture Condensation Warning Installation LocationSupplied Accessories Avoid the Hazards of Electrical Shock and FireCleaning the disc lens Disc handling Maintenance ServicingCleaning the cabinet Cleaning discsContents Features Front Panel Functional Overview212019181716 14 13 121110 9 8 Rear Panel Functional OverviewOpen the cover Insert batteries Remote ControlInstalling the Batteries in the Remote Control Using a Remote ControlVCR mode Timer SET button DVD/VCRTimer button DVD/VCR REW E button DVD/VCR DVD modeDisplays the following Front Panel DisplayDisplay Message Current status of the unitOm the AC outlet Plug in the power cords of the devices to the AC outletDisconnect the power cords of the de Connection to AN External Tuner14 EN Press Setup to exit Settings for the Video InputThis unit Connection to a TVCables not included Hdmi Mode and Actual Output SignalsConnections Basic Setup Actual Output Modes by MediaAudio Connection to AN Audio SystemChannel Analog Audio Connection Digital Audio Connection Dolby Digital decoderDVD /VCR Recorder Switching Hdmi Information VCR modeOn-Screen Display / Menu File Name InformationMain Menu Guide to ON-SCREEN Displays and MenusProceed to in Clock Setting on Initial SettingUse K / L to select Clock, then Setting the ClockClock Setting Press OKUnrecordable Discs Recording ModeInformation on DVD Recording Recordable DiscsBefore Recording Setting for Auto ChapterMake Recording Compatible It may take a while to load Disc completely Press REC Mode to select a recording modePress STANDBY-ON y Press OPEN/CLOSE a to close the disc trayPress Stop C to exit the title list Basic Recording & ONE-TOUCH Timer RecordingUse K / L to enter the date, then Timer RecordingPress Timer Use K / L to select New Program, then press OK Guide to Timer Programming DisplayMode Timer RecordingPress OK when all items are entered Use K / L to select a recordingWill disappear on the front panel display To stop the timer recording in progressPress Timer SET Press Timer Check the information on the list you will needPriority of Overlapped Settings Hints for Timer RecordingUse K / L to select Satellite Link Satellite LinkThen press OK Use K / L to set the desired starting time, then press BPress OK again.Satellite Link To Standby Mode is highlightedPress Timer SET to turn on the unit Satellite LinkOverwriting in the Middle of the Title Overwriting Unnecessary TitleOverwriting from the Beginning TitleOverwrite recording a Existing title B Existing title C Overwriting Unnecessary TitleHints for Overwriting Overwrite recording a Existing title B After overwritingRecording from an External Device External Device RecordingIt takes a while to load Disc OFF ON, then press OK. e.g. DVD+RW Setting a Disc to ProtectTo cancel the disc protect Use K / L to select Yes, then press OKFinalizing is completed Press Setup Use K / L to select Disc Edit, then press OKFinalizing a Disc Use K / L to select Finalize, then press OKAuto Finalizing Playing the Discs in Other DVD PlayersUse K / L to select ON, then press OK Make sure Dubbing ModeUse K / L to select Recording, then press OK Use K / L to select Dubbing Mode, then press OKPress Stop C to stop the recording Dubbing ModePress DVD Press D.DUBBINGInformation on Playback Press Stop C once to stop playback temporarily Basic PlaybackDirect Playback Press Play B to start playbackTo exit the title list, press Stop C Basic PlaybackPlayback from the Title List Use K / L to select a desired titleTotal time of recorded disc space Disc name Default No Disc Name Disc typeMaking edits compatible/finalize When DVD+RW is inserted Use K / L to select Play, then Press OKHints for audio CD tracks and MP3 files When selecting the folder Not available for audio CDPlaying Back an Audio CD and a CD-RW/-R with MP3 Files Follow steps 1 to 2 in Direct Playback onPlayback will be paused and sound will be muted Using the Title / Disc MenuPause Press DVD first During playback, press Pause FSkipping TV Commercials During Playback Special PlaybackResume Playback Fast Forward / Fast Reverse PlaybackSlow Forward / Slow Reverse Playback Special PlaybackRapid Playback Step by Step PlaybackMenu Marker SettingZoom Press DVD first During playback, press DisplayTitle / Chapter Search Using Prev H / Next GUsing Display SearchTime Search SearchAudio CD Random Playback Repeat PlaybackRepeat this step until you program all the desired tracks Repeat / Random / Program PlaybackProgram Playback You can program the disc to play back in your desired orderPress DVD first During playback, press Display or Audio Special SettingSwitching Subtitles Switching Audio SoundtrackReducing Block Noise Special SettingSwitching Virtual Surround System Switching Camera AnglesPress Title Information on Disc EditingGuide to a Title List Editing DiscsUse K / L to select Title Delete Editing DiscsDeleting Titles Use K / L to select Edit, thenAfter this operation is completed, press Return to exit Editing DiscsPutting Names on Titles Use K / L to select Edit TitleSubmenu will appear Setting Chapter MarksUse K / L to select Add, then press OK Press Return twice to exitClearing Chapter Marks To delete all chapter marks Clearing Chapter Marks cont’dAll chapter marks will be deleted Hiding Chapters Press Return to exit Setting Pictures for ThumbnailsPicture for thumbnail will be set You can divide one title into 2 new titles Dividing a TitleTitle will be divided into 2 new titles Name, then press OK. e.g. DVD+RW When you finish entering a title name, pressPutting Name on Disc You can put a name on the disc and change it from this menuSetting or Releasing Disc Protect You can erase all titles on a disc Erasing DiscUse K / L to select Yes, then press Making Edits CompatibleContents List of SettingsVCR DVD List of SettingsUse K / L to select a desired item, then press OK SetupsParental Lock Default OFF PlaybackPlayback cont’d SetupsDisc Audio Angle Icon Default on Disc Menu Language Default EnglishAudio Language Default Original Subtitle Language Default OFFDisplay OSD Language Default EnglishScreen Saver Default 10 minutes FL Dimmer Default BrightSelected item Progressive Scan Default OFFTV Aspect Default 43 Letter Box VideoRGB Range Default Normal When you finish with the setting, press Setup to exitFormat Default RGB Hdmi Audio Default onReset the setting to default Reset AllYour setting in recording will be initialized Recording VCR FunctionsIndex Search VCR FunctionsOther Operations Symptom Remedy TroubleshootingPress OPEN/CLOSE a TroubleshootingOPEN/CLOSE a to take out the disc. The disc canceled during Repairing process MAY not workFrequently Asked Questions 84 EN Language Code Language CodeGlossary Terminals SpecificationsGeneral RecordingDisco Grabable EspañolDiscos Reproducibles Códigos de RegiónPosición de la entrada externa Deseada, y luego presione OK Presione Setup y utilice K / LEspañol Utilice K / L para seleccionar laPara de tener la grabación presione Stop C Presione STANDBY-ON yPresione OK para activar Ajste Manual de Reloj Presione REC I para iniciar la grabaciónDetenga la Presione TimerConfigure una programación del temporizador Presione OK Abra la bandejaTel Customer Service1VMN25333
Related manuals
Manual 98 pages 48.94 Kb

ZV427MG9 specifications

The Magnavox ZV427MG9 is a versatile and user-friendly DVD recorder and VCR combo that caters to both VHS and DVD enthusiasts. This innovative device offers multiple functionalities, making it an excellent choice for those looking to bring their home entertainment experience into the modern age while preserving their treasured VHS collections.

One of the standout features of the ZV427MG9 is its ability to record directly from VHS to DVD, making it an ideal device for users who wish to transfer their favorite home videos and movies from tape to disc. The recording quality is impressive, with options for both standard and high-quality recordings, allowing for clear and reliable playback. This feature is especially appealing for those who want to preserve memories in a more durable format.

The device supports a wide range of media formats, including DVD-R, DVD-RW, CD-R, and CD-RW, enhancing its usability across different types of discs and allowing users to customize their playback experiences. This flexibility ensures that you can enjoy various media formats without the need for multiple devices.

Another notable aspect of the ZV427MG9 is its user-friendly interface. The intuitive remote control and on-screen menus make it easy to navigate the various functions, whether you're recording, playing back, or finalizing discs. The A/V inputs and outputs also allow for seamless integration with other home theater components, including televisions and sound systems, further enhancing the overall viewing experience.

Additionally, the ZV427MG9 incorporates some advanced technologies, such as auto-dub and programmable recording features. Auto-dub allows users to set up recordings in advance, simplifying the process of capturing content. The programmable recording feature enables users to schedule recordings with ease, ensuring that they never miss their favorite shows or movies.

In terms of design, the Magnavox ZV427MG9 is sleek and compact, making it a perfect fit for any entertainment center. Its stylish black finish blends well with most home décor, while its compact size ensures easy placement without taking up too much space.

Overall, the Magnavox ZV427MG9 stands out as a reliable and multifunctional device that seamlessly merges the capabilities of a DVD recorder and a VHS VCR. With its robust features and user-friendly design, it is an excellent choice for preserving cherished memories while enjoying a diverse range of media.
Top Page Image Contents