GoVideo DDV9500 manual Basic Antenna/Cable Hookup

Basic Antenna/Cable Hookup

If you have separate VHF and UHF antennas you will need to purchase a combiner, available at your local electronics store.

1 Connect the Antenna/Cable to the VCR - Disconnect the antenna or cable from your TV and connect it to the IN FROM ANTENNA jack on the back of your VCR. If your antenna cable is twin-lead, you will need to purchase an adapter, available at your local electronics store.

2 Connect the VCR to Your TV - Attach the supplied RF Coaxial Cable from the OUT TO TV connection on the back of the VCR to the VHF IN or CABLE IN connection on the back of your TV.

3 Set the channel on the back of your VCR to 3 or 4 (whichever is not being used by a local TV broadcast).

4 Turn on the power for your VCR and your TV.

5 Tune your TV to channel 3 or 4 (whichever you set as the output channel in step 3).

6 Connection is complete! Turn to Chapter 2 to famil- iarize yourself with the location of your Dual-Deck controls, or turn to Chapter 3 for Initial Settings.

If your TV has separate video and audio input connections, you

will achieve best results (including MTS Stereo and Hi-Fi playback) by using the Monitor Connections hookup on page 43.

8DUAL-DECK VCR USER'S GUIDE