GoVideo DDV9500 manual Setting the Clock, If you need to go back and change

Setting the Clock

After you set the language for the first time, the Set Clock menu will appear automatically (skip to Step 5). To set the clock at any other time follow each of these steps:

1 Press MENU until the DUAL-DECK FEATURES menu appears.

2 Press “1” to select VCR SETTINGS/SET CLOCK.

3 Press “1” to select DISPLAY SETTINGS/CLOCK.

4 Press “1” to select SET CLOCK.

5 Press the number buttons to enter information as you are prompted by the blinking cursor. If you don’t need to change the information for a particular item, press

to move to the next item.

Set Month (1-12) January is “01”, October is “10”, etc.

Set Year (0-99) Enter only the last two digits. For example “98” for “1998”.

Set Day (1-31) Enter today’s date. For example, if today is the fourth, enter “04”.

Set Hour (1-12) Enter only the hour. For example, if the time is 4:28, the hour is “04”.

Set Minute (0-60) Enter only the minute. For example, if the time is 4:28, the minute is “28”.

Set AM/PM (1-2) Enter “1” for AM or “2” for PM.

Set Daylight Savings Time (1-2) Enter “1” for AUTO or “2” for OFF. AUTO will automatically add one hour on the first Sunday in April (“Spring forward”) and subtract one hour on the last Sunday in October (“Fall back”).

1

2

3

6 Press QUIT to save and exit the menu system, or press MENU to save and return to the

DISPLAY SET- TINGS menu.

If you need to go back and change

an item, press or until you see the item, then enter the new information.

If you change the Date & Time accidentally, press CLEAR to restore the original clock settings, then press QUIT to exit.

It is important to set the Dual-Deck VCR’s internal clock to ensure accuracy on Timer Recordings and Date/Time Stamps.

4

16DUAL-DECK VCR USER'S GUIDE