Set two tapes to play sequentially
or in a continuous loop.
Sequential & Loop Play
Two decks give you twice the playback features of a normal VCR. Sequential Play allows you to insert tapes in both decks and play one after another. Loop Play allows you to play both tapes in a continuous loop.
To activate Sequential or Loop Play:
1 Insert tapes in both decks.
2 Press MENU appears.
3 Press “4” repeatedly to set PLAYBACK MODE to:
Norm - Tapes play normally.
Seq - (Sequential) Deck 1 plays to the end of the tape, then Deck 2 plays to the end of the tape. If Auto Rewind is set to on, both tapes will rewind automatically when playback is finished.
Loop - Deck 1 plays to the end of the tape, then Deck 2 begins playing. While Deck 2 is playing, Deck 1 automatically rewinds to the beginning. When playback is finished in Deck 2, Deck 1 plays again and the process repeats in a continuous loop until you press the STOP key. Rewinding is automatic
regardless of the Auto Rewind setting.
Automatic Tracking
Your
If you need to adjust tracking manually:
1 Press the TRACKING 
& 
keys to move the white streaks up or down and out of the picture. This disables the ATR System.
2 To reactivate ATR, press the | ATR key on the remote |
control. |
|
What is Tracking?
Tracking adjusts the VCR’s heads 
to fine tune playback. Your
CHAPTER 5 - PLAYBACK FEATURES 25