CBC CTR-030NC-2 manual Normal Recording, During the Recording mode

Page 21

NORMAL RECORDING

 

 

 

PREPARATION

POWER

V-POS H-POS

• Turn on the power of both the VCR and the monitor.

TIME/CNT/REM

TIMER

REC/PLAY HOURS

 

ALARM/INDEX

CURSOR

MENU

• If you have a TV instead of monitor, turn on the power of TV

LOCK

 

SHARPNESS

COUNTER

TRACKING ENTER

 

CLEAR

 

 

 

 

SOFT HARD

and then set the TV’s source selector to VIDEO.

 

 

 

REC/PLAY HOURS

REC

REC MODE

 

REC TIME

L6H

TRIGGER OUT

1 FIELD

SERIES

OFF

REPEAT OPTION :

 

STOP AT EOT.

(UP) (DOWN) (ENTER) (MENU)

REC MODE

 

REC TIME

000H

INTERVAL

10SEC

TRIGGER OUT

1 FIELD

SERIES

OFF

REPEAT OPTION :

 

STOP AT EOT. (UP) (DOWN) (ENTER) (MENU)

1 Insert the VIDEO CASSETTE that has safety tab in place.

2 Press REC/PLAY HOURS to choose the desired recording mode.

The selected time is displayed in the VCR indicator panel.

L6H L18H L30H 72H96H 120H 168H 240H480H 960H 000H

If you select the “000H” REC TIME, the INTERVAL time mode is changed on the REC MODE SET UP menu as below, to the second unit.

10 SEC 20 SEC 30 SEC 1 MIN 2 MIN 3 MIN AUTO

If you select AUTO, this unit records when the external 1-SHOT REC signal is input.

3 Press the REC button.

Recording will start.

(The REC indicator will appear in the VCR indicator panel.)

4 Press the STOP button to stop recording.

. To PAUSE the recording

During the RECORDING mode...

1 Press the P/STILL button to pause the tape.

2 When you want to continue recording, press the P/STILL button again.

After 5 minutes in pause mode, the tape will be stopped automatically to protect the tape and the video heads.

. To Record Check

When in record mode, pressing the REC CHECK should cause the unit to reproduce recently recorded video.

During the RECORDING mode...

Press REC CHECK to reproduce recently recorded video. During the Record Check, the unit cann’t recrod at all. After the Record Check, the unit returns to the original recording mode.

RECORDING

19

Image 21
Contents Time Lapse VCR Page Important Safety Instructions Introduction Moisture CondensationContents FeaturesControl Names and Locations Video IN/OUT Jack Reset Button Power CordPIN Terminal Block Connect external signals Audio IN/OUT JackCLOCK, Tape COUNTER, Error Lock RepeatCassette Indication VCR Function Indication Installation Multiplexer Connections HOW to Connect Multiplexer with Trigger Input TerminalHOW to Connect Switcher Without Trigger Input Terminal Matrix Switcher ConnectionsSeries Record Connection Alarm Record ConnectionSetting the on Screen Display Menu SelectionMain Menu Setting the Setup Menu VCR SET UP Menu Setting the SET TimeClock SET UP Menu Example May 23, 2003When Handling Video Cassettes Safety TABVideo Cassette Tapes LoadingNormal Playback Press REC/PLAY Hours time modeNormal Playback Tracking ControlSpecial Effects Playback To Search Alarm RecordingTo Watch a Still Picture To Watch a Field Advance PictureShuttle Ring During Still modeJOG Dial Jog DialReal Time Counter Tape Counter Memory FeatureCounter Memory Function Tape RemainingNormal Recording During the Recording modeRepeat Recording REC Mode MenuTimer Recording Timer REC Mode MenuDAY option Series Recording Alarm SET UP Alarm RecordingFor example When the Alarm REC Mode is set to L6H Alarm Recording cont’dCheck the Alarm Record Information Alarm REC Mode MenuRecording Time Table Information Check the Power Fail Recall USE to Lock ON/OFF SwitchPower Fail Inform Menu SELF-DIAGNOSIS Error Code TableVideo Head Cleaning Service Guide TableSymptom Check Point & Correction TroubleshootingGeneral Specifications3834RS0069H