|
|
|
|
| EMERSON AND THE | |
|
|
|
|
| OF EMERSON RADIO CORP., PARSIPPANY, NEW JERSEY, U.S.A. | |
Owner’s Manual | If you need additional operating assistance after | |||||
reading this owner’s manual or to order replace- | ||||||
Video Cassette Recorder | ment accessories, please call | |||||
TOLL FREE : | ||||||
EWV603 |
|
|
|
| ||
|
|
|
| or visit our web site at | ||
|
|
|
|
| ||
|
|
|
|
| ||
|
|
|
|
|
| |
1. Before using your VCR
RF Output Channel
If channel 3 is already occupied for broadcasting,
1)Set your TV to channel 4.
2)Insert a
3)Press the PLAY button once.
4)After a few seconds, press the PLAY button on the VCR for 3 seconds.
•The RF output channel will change to channel 4 from channel 3 and you will see a playback picture.
•When a picture does not appear on the TV screen, repeat step [4].
5) Press the STOP button to stop playback.
HintHint
•The RF output channel may not change when you adjust tracking during playback. In this case, stop the playback, and start the playback again. After that, press the PLAY button on the VCR for 3 sec- onds again.
Basic VCR/TV Connection
Stereo TV Connection
Cable Antenna
Cable Antenna
(Back of VCR)
You can use the AUDIO OUT jacks and VIDEO OUT jack on the back of
VIDEO AUDIO IN |
|
| ||
IN | L | R | AUDIO | ANT |
| ||||
|
|
| L | IN |
|
|
|
| |
OUT IN
Signal or
Signal or
(Back of TV)
the VCR if your TV has Audio/Video
R
VIDEO
OUT
(Back of TV) |
Disconnect |
2 |
Connect
ANT |
|
IN | 3 |
OUT | |
| Connect |
Input jacks. In this case, you need to set the TV to external Line Input Mode. Please refer to your TV’s owner’s man- ual.
OUT IN 
Audio/Video Cables
(not supplied)
1 |
Connect | (Back of VCR) |
(Back of TV)
RF Cable (supplied)
4 Plug the AC power cords of the VCR and TV into the AC outlets.
Hint for Cable Box or Satellite Box
Front & Rear Terminals
AUDIO OUT jacks
Connect the audio cables to the audio in jacks of a camcorder, another VCR, a stereo amplifier, or an audio system.
AUDIO IN jacks
Connect the audio cables from the audio out jacks of a camcorder, another VCR, or an audio source.
Connection A | (Back of VCR) |
(Cable | box or | ANT |
|
|
Satellite box) | IN |
|
| |
IN OUT |
| OUT | RF Cable | E |
Cable |
| |||
|
|
| ||
|
| (supplied) |
| |
Signal |
|
|
| |
|
|
| (Back of TV) | |
|
|
|
| |
Select this connection when you want to view or record a scrambled channel. With this connection, channels cannot be changed on the VCR. You can view or record ONLY the channels you have selected on the cable box or the satellite box.
•While you are recording, only the recorded channel can be viewed.
To select channels of the cable box or satellite box
1)Turn on the VCR by pressing the POWER button, and then, press the VCR/TV button.The POWER and the VCR/TV indicators on the front panel will light on. Then, press the CHANNEL buttons to select channel 3 or 4 (the same channel as the output channel of the cable box or satellite box).
•If you use the channel 4, you need to change the VCR’s RF output to channel 4. Refer to “RF Output Channel”.
2)At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).
3)At the cable box or satellite box, select the channel you
want to view or record.
Connection B | (Back of VCR) |
|
|
|
| AUDIO | ANT | ANT IN jack | ||
|
|
|
| IN | ||||||
| ANT | (Cable box or |
| AUDIO | ANT IN |
| L |
| Connect your antenna or cable box. | |
| IN |
|
|
|
| |||||
Cable | OUT | Satellite box) | E | OUT | IN |
| OUT | IN |
|
|
|
|
|
|
| L |
|
|
| ||
Signal |
| IN OUT |
|
| R |
|
| R |
| ANT OUT jack |
|
| VIDEO | OUT |
|
|
| ||||
|
| RF Cable (Back of TV) | OUT | IN |
| VIDEO | OUT | Connect the RF cable (supplied) to | ||
| RF Cable (supplied) |
|
|
|
|
|
| |||
Select this connection when you want to change channels | VIDEO OUT jack |
|
| OUT | IN |
| the antenna input jack on your TV. | |||
|
|
|
|
|
| |||||
on the VCR. With this connection, you may watch one | Connect the video cable to the video in jack |
|
| VIDEO IN jack | ||||||
channel while recording another. |
| of a camcorder, another VCR, or a TV. |
|
|
|
| Connect the video cable from the video out | |||
• You may not view or record a scrambled channel. |
|
|
|
|
|
| jack of a camcorder, another VCR, or an | |||
To select channels of the cable box or satellite box | POWER |
|
|
|
| |||||
VIDEO |
| MENU REC/ |
|
| video disc player, etc.). | |||||
|
|
|
| CHANNEL |
|
|
|
|
| |
1)At the cable box or satellite box, select channel 3 or 4 |
|
| POWER VCR/TV TAPE IN TIMER REC |
|
| |
(the same channel as the VCR’s RF output channel.) |
|
|
|
|
| |
• Refer to “RF Output Channel”. |
|
|
|
|
| |
2)At the TV, select the same channel as the output chan- |
| Supplied Accessory |
| Installing the Batteries for | ||
nel (3 or 4) of the cable box or satellite box. |
|
| ||||
3)Turn on the VCR by pressing the POWER button, and |
| • Remote control | • RF Cable | • Owner’s Manual | the Remote Control | |
then, press the VCR/TV button .The POWER and |
| Install two AA batteries | ||||
| (NA372UD) with | (WPZ0901TM002) | (0VMN03902) | |||
VCR/TV indicators on the front panel will light on. Then, | ||||||
Two AA batteries |
|
| (supplied) matching the | |||
select the channel you want to view or record. |
|
|
| |||
To play back a tape |
|
|
|
| polarity indicated on | |
Follow the steps 1) to 2) above. Then, play back a tape. |
|
|
|
| the bottom of the | |
• Refer to “Playback” on page 5. |
|
|
|
| remote control. | |
To view one channel while recording another |
|
|
|
|
| |
1)While you are recording on the VCR, press the VCR/TV but- |
|
|
|
| ||
ton so that the VCR/TV indicator disappears on the VCR. |
|
|
|
| Printed in China | |
2)At the cable box or satellite box, select the channel you |
|
|
| |||
want to view. | - 1 - |
|
| 0VMN03902 / HF440UD ★★★★★ | ||