4Set the security lock on VCR No.1.
•When the end of the tape on VCR No.1 is reached, the output at the SERIES OUT terminal will switch signal. This will start recording on VCR No.2, the tape will stop and be ejected on VCR No.1.
Autorepeat Recording
Autorepeat Recording
The same tape can be recorded over many times. Please note that if you activate this feature you will lose the entire previous recording.
1Press the MENU, SHIFT , SHIFT button in sequence to display the REC MODE SET menu.
✔
•If during autorepeat recording there is an alarm trigger, “ “ is displayed on the display panel and alarm recording will take place. Autorepeat recording will continue after alarm recording has completed its programmed duration.
2Press the SHIFT button to make the arrow mark ( ) point to Repeat Rec Set.
3Press the SHIFT button to set the desired autorepeat recording mode.
NO . . . . . . Autorepeat recording doesn’t take place. YES . . . . . Autorepeat recording takes place.
“R.REC” will light on the display panel.
4Press the MENU button two times, the normal screen is displayed.
•The setting procedure is now complete.
5Press the REC button.
•Recording will start. When the tape’s end is reached, the VCR will rewind it to the beginning regardless of the counter memory, and recording will resume.
24 | Time Lapse Video Cassette Recorder | Time Lapse Video Cassette Recorder | 25 |