SU4/UF2
ALTERNATIVE CABLE TV CONNECTIONS
Cable converter/decoder output channel setup
1Be sure the cable connections are correct. (See page 12.)
2Turn on the TV, VCR and cable converter/decoder.
3Set the TV to channel 3 or 4.
4Press the VCR button on the remote control to select the VCR operation mode.
5If the VCR indicator is off, press the TV/VCR button on the remote control.
The VCR indicator lights.
NOTE: If the initial setup has not yet been
completed, the “Auto Setup” message will appear. In that case, first follow steps 5 – 7 under “INITIAL SETUP” on page 15.
6Press the MENU button on the remote control. The main MENU appears.
@@@@@@@@@MENU
Timer@program
VCR@setup
Clock@set
Language@select
Rec.List@super
Auto@tuning@memory
[CH§‡]†Select
[SET]†OK@@@@@@[MENU]†TV
7Press the CH/TRACK l (or j) button to select the VCR setup option, then press the SET button.
The VCR setup menu appears.
CATV/TV@@@@@@@…CATV@TV
Cable@box@@@@@…No@@@Ch02
Child@Lock@@@@@On@@…Off
Off@timer@@@…Off@2Hr@6Hr
8Press the CH/TRACK l (or j) button to select the Cable box option.
9Press the SET button to set your cable converter/decoder output channel. The output channel should be indicated on the cable converter/decoder back panel. If not, please refer to the cable converter/decoder instruction manual for details.
Press the SET button repeatedly. Each time you press the button, the selection changes:
No → Ch02 → Ch03 ... Ch07.
The selection is indicated by the “z” next to it.
NOTE: Select “No” if you are not using the cable box.
FWhen finished, press the MENU button to exit the menu display.
IMPORTANT NOTES:
When the cable converter/decoder output channel is selected as described above,
œThe VCR tuner remains set to receive the same channel as the output channel of the cable converter/decoder. Auto channel programming and manual channel selection using the VCR tuner are not possible.
œIf you turn on the cable converter/decoder after turning on the VCR, no image will appear on the TV screen. In this case, turn off the VCR, then turn it on again.
œLeave the cable converter/decoder on until timer recording is complete.
œFor timer recordings, you must select the channel to be recorded using the channel selector on the cable converter/decoder.
[CH§‡]†Option
[SET]†Select@@[MENU]†TV
13