Your network administrator should tell you the name of the zone (if any) to select. After you choose a zone or if there are no zones, the AppleShare file servers (in the selected zone, if applicable) appear in the upper-right corner of the window.
Note: Depending on the version of system software that your computer is using, the Chooser window may look slightly different.
4 Click the name of the file server that is sharing the AppleShare Client 3.8 software in the “Select a file server” list.
Your network administrator should tell you the name of the file server to select.
If your network is divided into zones, click the zone in which the file server is located in the AppleTalk Zones list.
Select the AppleShare icon in the upper-left box of the window.
1 Choose the Chooser from the Apple (K) menu.
2
3
Updating Your AppleShare Client Software Over a Network
After you have upgraded to system software version 7.6 or later and Open Transport 1.1.2 or later, you can update your AppleShare Client software by installing AppleShare Client 3.8. If your AppleShare IP administrator has made the software available to you on the network, you can perform the update by logging on to the file server.
Note: To determine the version of AppleShare your computer is running, select the AppleShare icon in the Extensions folder inside your System Folder. Then choose Get Info from the Finder’s File menu.
To log on to a file server to install AppleShare Client 3.8, follow these steps:
4