Apple 3.8 user manual

Page 7

If your network contains zones, they are listed in the AppleTalk Zones list. When you select a zone, AppleShare file servers in that zone are listed in the upper-right portion of the window.

Note: Depending on the version of system software that your computer is using, the Chooser window may look slightly different.

3Click the zone (if any) and the file server you want to connect to.

Your network administrator should tell you the name of the zone (if any) to select.

Important A file server may be available in more than one zone. For best performance, connect to the server that is in the same zone as your own computer. (Your computer’s zone is displayed in the “Current zone” pop-up menu in the AppleTalk control panel.)

If your computer is set up for TCP and if the file server you selected is set up for TCP, the connection is made over TCP automatically. Otherwise, the connection is made over AppleTalk.

Note: If the server and client are not on the same AppleTalk network, the server you want to connect to may not appear in the “Select a file server” list. To connect to the server, click the Server IP Address button and enter the server’s IP address or name in the dialog box that appears. Then click OK.

4Click OK.

7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents User’s Manual Apple Computer, Inc. All rights reserved Apple Computer, IncAppleShare Client 3.8 User’s Manual Page Click OK Dialog box similar to the following appears AppleShare Client Quick Reference Page Close the Chooser Disconnecting From a File Server Read Only Users can see, open, and copy files and folders Following are brief descriptions of each privilegeFinding Out What Privileges You Have Crossed-out pencil You can’t make changes
Top Page Image Contents