Topfield TF4000PVR CoCI manual VI-1. LNB Setting, Satellite Name, Tuner Select, Connection Type

VI-1. LNB Setting

The Low Noise Blockdown Converter (LNB) amplifies the signal received by the satellite dish and lowers the frequency of the signal. The signal is then fed from the LNB at the dish via cable to the PVR.

For the LNB Settings, move the cursor to I n s t a l l a t i o n item and press button.

Then, move the cursor to the LNB Setting item and press button.

A. Satellite Name

Press the button to display the Satellite List. The Satellite name list is put in alphabetical order. Select one of the preprogrammed satellites that correspond to the value of the antenna. If the desired satellite name is not in the list, then select Others.

B. Tuner Select

Select a tuner for channel searching from the selected satellite.

C. Connection Type

If two tuners share one LNB as the diagram 2-2) on page 12, select Loop Through. If a service is being recoded, the other tuner can receive only the signal of the same band and polarity as being recorded in this configuration.

If the tuners are connected to separated LNBs (or Dual LNB), select Separated. There is no restriction as in the Loop Through configuration.

D. LNB Frequency

Select the L.O. Frequency set to antenna. The LNB Frequency of 5150, 9750,

10600, 10750, 11475 MHz or Universal can be selected by using the or button.

36