Topfield TF4000PVR CoCI manual VI-3 . Service Copy, Tuner 1 to Tuner, Tuner 2 to Tuner, All

VI-3 . Service Copy

This item enables you to copy the service list of one tuner to that of the other.

A. Tuner 1 to Tuner 2

Copy the service list of Tuner 1 to that of Tuner 2.

B. Tuner 2 to Tuner 1

Copy the service list of Tuner 2 to that of Tuner 1.

C. All

Add the service list of Tuner 1 and Tuner 2 and save it to that of Tuner 1 and Tuner 2.

VI-4 . Motorized DiSEqC 1.2

If you have DiSEqC 1.2 motorized system, then you can use the DiSEqC 1.2 functions.

. Satellite Name

A selection of satellite names that will be used to identify a motor position.

. Tuner Select: Select a tuner for channel searching from the selected satellite.

. Frequency: Selects the frequency to catch the strong signal.

. DiSEqC Command Mode : Change the current mode between User and Installer modes.

-U s e r: This mode is used to fine-tune the position of the motor for better reception.

-Installer: This mode is used to search for the position of a satellite manually.

. Movement: In case of User mode, the movement is adjustable by fine-tuning. In case of Installer mode, the movement is adjustable by East , West going command.

40