Topfield TF 7700 HSCI manual Searching every service of a satellite

32 Service Search

•Searching every service of a SMATV (Satellite Master Antenna Television) system.

Searching every service of a satellite

To search every service of a satellite, perform the following steps:

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Auto.

3.If you set the Network Search option to On, the digital receiver will check up the up-to-date channel information as searching services, but it takes rather longer time.

Searching every service of a transponder

To search every service of a transponder, perform the following steps:

1.Choose your desired satellite at the Satellite Name op- tion.

2.Set the Search Mode option to Manual.

3.Choose your desired transponder at the Frequency op- tion or enter it with the numeric buttons.

4.Enter the symbol rate of your desired transponder to the Symbol Rate option with the numeric buttons.

5.Set the Polarization option to the polarization of your desired transponder.

6.If you set the Network Search option to On, the digital receiver will check up the up-to-date channel information as searching services, but it takes rather longer time.

7.Set the Modulation option to the modulation type of your desired transponder. If your desired transponder has high definition broadcasts, you should set this option to DVB-S2 QPSK or DVB-S2 8PSK. Then the FEC option