Topfield TF 5100 CI, TF 5000 CI manual Connecting to your television, To use the Scart connector

Page 17

2.4 Connecting up your digital receiver 11

Connect the antenna cable to the LNB IN socket.

If you have another digital receiver, link it from the LNB OUT connector.

2.4.2 Connecting to your television

Between all the following connectors of your digital receiver, we recommend you use the ﬁrst connector to get best picture quality. If your television does not have the matching connec- tor then use the next connector in the following order for best picture quality.

1.SCART connector (TV)

2.Composite connector (VIDEO)

3.RF connector (RF OUT)

You should conﬁgure audio and video settings after connect- ing up the digital receiver. See § 3.2 for detailed description.

To use the SCART connector

For best results with a standard television set, you should use a SCART cable, plugging one end into the TV socket on the digital re- ceiver and the other end into a free SCART socket on your television.

Some televisions have inputs via Component or S-Video con- nectors rather than SCART. If you have such a television, use an appropriate conversion cable to link the TV socket on the digital receiver to the matching socket on your television.

Image 17

Contents TF 5000 CI TF 5100 CI Page Contents Service Search Listing Services Page Introduction FeaturesFront panel Controlling the digital receiverStandby Remote control What is common interface?To watch a pay service, you should take the following steps Unpacking SetupSafety precautions Setup VCR Rear panel connectionsConnecting to the antenna Connecting up your digital receiverTo use the Scart connector Connecting to your televisionTo use the composite video connector Inserting batteries in the remote control Connecting to your video cassette recorderSetup Language settings Preference SettingsSubtitle language Video and audio settingsColor model Television standardTelevision aspect ratio Video cassette recorderRadio frequency output Sound modePreference Settings Television standards by country Local time settingLocal time setting Parental control Adjusting the on-screen display Preference Settings 1 Conﬁguring LNB settings Service SearchSearching broadcasting services Other is K u band which ranges approximately from 12 to Searching broadcasting services 2 Conﬁguring DiSEqC 1.2 settings 3 Conﬁguring Usals settings Searching services Searching broadcasting services Editing the transponder list Resetting to installer settings Resetting to factory settingsResetting to installer settings Watching television Volume controlDaily Usage Button and press Viewing program information Watching favorite servicesSelecting audio tracks Viewing teletext Viewing electronic program guideSelecting subtitle tracks Light bar on your choice with Watching multifeed program Making timer eventsYour desired satellite Daily Usage Editing the service list Listing ServicesListing Services Editing the favorite list With V + Buttons and vertically Buttons. Pressing Transferring receiver dataTransferring receiver data Firmware Update From your computer via RS-232 port Over the airFrom another digital receiver via RS-232 port From another digital receiver via RS-232 port Index Video Pdif Usals Page Correct disposal of this product