Topfield TF 5100 CI, TF 5000 CI manual Transferring receiver data

6.3 Transferring receiver data 49

•Service list

•Favorite list

•Preference settings

It is possible to transfer receiver data to your digital receiver from another same digital receiver connecting them with a RS- 232 cable.

To transfer receiver data, perform the following steps:

1.Plug one end of a RS-232 cable (9 pin D- sub cable) into the RS-232 port on the

digital receiver, and the other end into the matching port on the other digital re- ceiver.

2. Turn on both of them.

3. Select the Installation > Transfer Data to Other IRD menu.

4. Restart the digital receiver.

NOTE

You had better memorize some important data such as video settings before starting transfer to avoid resetting them.