RGB Spectrum LES290A quick start Channel 1 Connection Settings, Finishing Up

Channel 1 Connection Settings

On the Main Menu, click Connection.

1.Set the Active Connect pull-down field to Auto Start

2.Set the Remote Port field to 8000

3.Set the Remote Host field to the IP address of the QVHD, for example, to the factory default value 192.168.1.200

Figure 6. TCP Connection Settings

Click the OK button when finished entering your Serial Settings.

6.Finishing Up

1.On the Main Menu, click Connection, then click the Yes button.

2.After the LES290A Serial Server has rebooted you are ready to use the Serial Server to connect to the QVHD.

The Serial Server will retain its configuration through power and connection cycles.

RGB Spectrum, Inc.	QuadView HD – Serial Server Set-up	6
Rev. 1 - 8/12/08