RGB Spectrum LES290A quick start Connecting your serial control device to the Serial Server

Page 7

7.Connecting your serial control device to the Serial Server

Make the serial connection from the serial control device to the Serial Server.

a.The LES290A Serial Server comes with a DB25-M to DB9-Mcable adapter, making the LES290A Serial Server a DTE device, which will connect, directly to a DCE DB9-F serial control device.

b.To connect the LES290A Serial Server to another DB9-M DTE device,

such as a PC serial port, you will need to use a DB26-F to DB9-Fnull modem cable.

Serial cables and adapters are available from many sources including BLACK BOX.

8.Connecting the Serial Server to the QVHD

a.If the connection from the LES290A Serial Server to the QVHD is over a network, connect both devices to convenient hub, router, or switch ports with straight-through Ethernet cables.

b.If the connection is point to point connecting only the LES290A Serial Server and the QVHD, use a crossover Ethernet cable.

Notice: BLACK BOX is a registered trademark of Black Box Corporation.

 

RGB Spectrum

Corporate Headquarters – USA

Corporate Headquarters – Europe

950 Marina Village Parkway

Rootweg 24

Alameda, CA 94501

5721 VK Asten

Phone: 510-814-7000

The Netherlands

Fax: 510-814-7026

Phone: +32.11.515600

Support@rgb.com

 

 

www.rgb.com

RGB Spectrum, Inc.

QuadView HD – Serial Server Set-up

7

Rev. 1 - 8/12/08

 

 

Image 7
Contents Gathering IP parameter information Configuring the Serial ServerDeviceInstaller LES290A prompts for a User name and Password Home Click Network from the main menu Server Settings & Host List Menus Static IP Address ConfigurationSetting up a Point-to-Point or Stand Alone Configuration Select Use the following IP configurationChannel 1 Serial Settings Serial SettingsFinishing Up Channel 1 Connection SettingsConnecting the Serial Server to the Qvhd Connecting your serial control device to the Serial Server