Replacing Headphone Batteries

Rosen Entertainment Systems

USING THE INCLUDED WIRELESS HEADPHONES

The system comes with two (2) infrared (IR) wireless headphones. These headphones receive a signal from an IR transmitter built into the unit. These headphones allow rear-seat passengers to listen without using the vehicle speakers.

To turn the headphones on and off, slide or press the Power ON/OFF button on the ear piece. The Power LED on the ear piece indicates when headphone power is on. Power turns off automatically after sev- eral minutes of no audio, in order to preserve battery life.

To adjust the headphone volume, rotate the thumb wheel on the head- phones.

The wireless IR headphones require two AAA batteries. To replace the batteries, slide off the battery compartment door on the left earpiece and insert batteries, as shown. Make certain that the battery orientation matches the marks inside the battery compartment.

Adjust headphones here

Power On/Off Switch

Volume Knob Power

LED

Batteries

LISTENING OVER THE CAR SPEAKERS

The system uses an FM Modulator (FMM) to send audio through the vehicle radio and speakers. To listen over your speakers:

1Make sure system MUTE is off. Press SPEAKER. “Speaker Sound” appears.

2Turn on the car radio. Tune to one of the following FM frequencies 87.7, 87.9, 88.1, 88.3, 88.5, 88.7, 88.9

You may want to store the FM Modulator frequency as a preset of your radio for ease of use.

If the words “Headphones Only” appear. Press the Speaker button a second time to display “Speaker Sound”. If you have any questions about your FMM, please ask you Rosen dealer.

Note: After you ﬁ nish listening over the car speakers, press the speaker button to display “Headphones Only”. This returns the car radio to normal function.