Changing and Adjusting the Display

Rosen T8 Owner’s Manual

Selecting a display mode: The system’s “widescreen” display has a 16:9 aspect ratio - wider than a standard television. While many DVD’s provide widescreen video images that ﬁ t the screen, standard broadcast TV and many video games don’t.

•To view widescreen DVD’s, press the DISPLAY button on the system’s remote control until “WIDE” is displayed on the screen.

•To watch “fullscreen” DVD’s, the internal game system, or broadcast television, select “STANDARD”.

Display adjustments: The display has adjustable video settings. To change these settings, press the DISPLAY button on the remote con- trol and hold it for two seconds. The following menu appears:

To select a setting to be changed: Press the DOWN button to move the cursor down the menu list. After you reach the ﬁ nal setting, pressing the DISPLAY button again will cause you to exit the menu.

To change the value of a setting: Use the LEFT and RIGHT arrow but- tons. The range is from 0 to 63.

To exit the menu: Press the DISPLAY button to save settings and exit.

Note: See Page 12 for more on adjusting the Brightness setting.

Note: The internal DVD player can be conﬁ gured for either a 16:9 “Wide” image output or a 4:3 standard image output. Since the unit has a widescreen display, the DVD player should be conﬁ gured for “Wide”. For more, see Page 13.

Note: The internal DVD player also has a set of video adjust- ments, which are separate from the main adjustments. For more information, please see Page 18.

USING THE BUILT-IN LED DOME LIGHTS

The system has built-in dome lights. In many vehicles, these built-in dome lights may replace an original factory dome light which was dis- placed when the system was installed. The dome lights are controlled by both the Dome Light button on the front panel and by the matching Dome Light button on the remote control.

When the lights are off, press either button to turn them on.

When the lights are on, press either button to turn them off.

When the lights have been turned on manually using the Dome Light button, they will automatically turn off after all the doors are closed.

Dome Light

button

Note: Some vehicles have a dome light dimming feature that causes the light to fade out gradually after the doors are closed. The unit’s dome light may not turn off at the exact speed that the factory dome lights fade, but it will turn on and off normally when the doors are opened and closed.