- 13 -
Operation Procedure
1Turn on the power of each
equipment.
2Properly adjust the light for the
object.
3Adjust the flange back of the lens,
the iris and the focus.
• Flange back must be adjusted when
the camera is used for the first time or
after replacement of the lens.
4Adjust the white balance.
• This adjustment is needed when the
camera is used for the first time or
after leaving unused for a long time.
• The adjustment is necessary when
the lighting condition or brightness is
changed.
• After adjusting the white balance
once, re-adjustment is not needed
under the same condition.
5Adjust the black balance.
• This adjustment is needed when the
camera is used for the first time or
after leaving unused for a long time.
• The adjustment is necessary when
the ambient temperature is greatly
changed or at the change of season.
• After adjusting the black balance
once, re-adjustment is not needed
under the same condition.
6Start shooting.
(After shooting, be sure to turn off the
power of each equipment connected.)