WASHING PROCEDURE
Before starting washing, check the following;
Connect the water supply hose to the water tap. Leave a tap open. Plug the power cord in. Make sure to lay down the drain hose. (In case no drain pump)
FUZZY COURSE POWER | START/ |
| HOLD |
1.Put the laundry into the washer and push the POWER button to on.
•Fuzzy course button lights on.
2.Press START / HOLD button.
•Measuring the weight of laundry, washer moves it’s body without water and then indicates adequate amount of water and detergent.
•The adequate temperature of water is automatically selected.
3.Open the lid and put the detergent/ softener in proportion to the water level indicated. Then close the lid.
-When you open the lid in operation, it stops washing (But water supply will be continued).
-In case of using the hot water only, cold water is supplied during the first 20 seconds to avoid damaging the laundry by hot water.
-On it’s operation in every course, washing time, rinsing frequency & spinning time can be adjusted.
-With the press of the function button on water temperature, the water temperature in washing/ rinsing is selected manually in every course (except wool course).
-With the press of the water supplement button, additional water is supplied in rinsing the laundry.
(except CLEAN TUB course)
BLANKET COURSE | POWER | START/ | |
HOLD | |||
|
|
(For big laundry like quilts or bedcovers)
1.Put the laundry in the washer and press the POWER button to on.
2.Select the course button once.
3.Press START/HOLD button.
Put the detergent/softener in proportion to the water level and then close the lid.
•Blanket may get stained with the detergent. Therefore, detergent in the liquid detergent device is suggested.
Put the laundry into the washer and add detergent, too. Be careful not to overload. Use right detergent
for the fabrics you are washing.
SPEEDY COURSE | POWER | START/ | |
( For laundries with light | HOLD | ||
| |||
dirt like towels in a short time) |
|
|
1.Put the laundry in the washer and press the POWER button to on.
2.Select the course button twice.
3.Press START/HOLD button.
Put the detergent/softener in proportion to the water level and then close the lid.
•Spinning the washer board brings high energy efficiency.
•In case of heavy laundry, it automatically spin the washer tub to improve the power of washing.
Note
-Measuring the weight of laundry, washer moves its body without water in every courses, and then indicates adequate water level and amount of detergent.
(except clean tub course)
-Every course automatically indicates the water temperature and also it can be selected by pressing the water temperature button as you want. (except wool course)
WOOL COURSE
(For laundries with wool washing | POWER | START/ | |
HOLD | |||
mark like sweaters, cardigans or |
| ||
|
| ||
delicate clothes) |
|
|
1.Put the laundry in the washer and press the POWER button to on.
•Be sure the weight of laundry is less than 2kg.
2.Select the course button three times.
•Select the adequate water level manually in case of light laundry for the size
3.Press START/HOLD button.
Put the detergent/softener in proportion to the water level and then close the lid.
•Slightly dry the laundry at the last to avoid
wrinkles.
•Cold water only be selected.
•Use neutral detergent
•Spinning into a side together or spinning the washer board only prevent the damage on the laundry.
5
