Operating the System
Operating the System
Precautions
•Use this system only after proper installation by a qualified installer.
•If the internal temperature of the vehicle is extremely high, allow a short cooling down period before operating the unit.
•If the unit shows signs of overheating or malfunction, power off the unit and consult your dealer immediately.
•Do not open the unit; there are no serviceable parts inside.
Switching On
Use the system when your vehicle is running or the ignition switch is in the “accessory” position.
To avoid a dead battery, do not use the system for long periods of time without the engine running.
Lowering the Screen
To lower the screen, press the release button on the overhead monitor, as shown. The screen will lower into the viewing position.
To adjust the viewing position, insert two fingers into the adjustment knob and rotate as needed.
Adjustment Knob
Release Button
Using Auxiliary Sources
Using Auxiliary Sources
The system includes RCA inputs on the front of the DVD player that enable you to attach an external source device such as a video game or camcorder. You can also listen to an external audio source such as an MP3 player, portable CD player, or MiniDiscTM.
Note: Before attempting to use any auxiliary source, be sure you have the appropriate cable to connect to the system.
To connect the auxiliary device to the DVD front panel RCA jacks:
1Connect the right channel audio to the red jack.
2Connect the left channel audio to the white jack.
3Connect the video to the yellow jack.
Note: When using a
To play an auxiliary device:
1Power on system.
2Power on the device.
3Press MODE on the remote until the auxiliary source device is activated. The system cycles from DVD Mode, to TV Mode, to auxiliary source mode, and back to DVD Mode.
Page 5 | Rosen Products | ClearVue 6821 DVD System Owner’s Manual | Page 22 |