Audiovox AVP-8200 operating instructions Switch to TV mode

SYMPTOMS	CAUSE	POSSIBLE SOLUTIONS
Play mode indicated but no audio or	• VCP connected by (75 OHM coax)	• Switch to TV mode.
video to TV. (continued)	antenna coax to TV.
	TV set in “monitor mode”.
	• VCP connected to A/V output jacks.	• Change connections from A/V output
	(AVT-1475 or 1498)	to A/V input.
	• Output of VCP A/V RCA cables or coax	• Check connector between VCP and
	not connected to TV input.	TV.
	• Switchable input device used between
	TV and VCP (game prep).
	• Poor connection between VCP output	• Check connection(a).
	and TV input.
	• Reversed A/V inputs to TV.	• Check connection(b).
	• Shorted coax cable between VCP and TV.	• Check cable/by pass or continuity test.
Poor video/snowy picture or lines on	• Dirty Heads.	• Clean head using tape cartridge
screen.		cleaner. We recommend using
		cartridge with cloth or paper tape and
		cleaning drops included.
		These are readily available at retail
		stores.

24