•If the polarity is reversed, the unit will not operate.
•Use of this VCP is not recommended in excessive heat. If the inside temperature of the vehicle is over 100 F, do not use the VCP. Allow the VCP to cool before use.
MAKING VCP CONNECTIONS
1.Powering the Unit:
Insert one end of the power connector into the 4 PIN DC 12V jack on the back of the unit; connect the other end to an ACC (switched) power source of the vehicle.
2.Connecting the Antenna:
Connect the coaxial cable of the external antenna to the TV ANT jack on the back of the unit.
3.Driving the External Monitors:
Connect any of the 3 MONITOR PORTS in the rear of the unit to the external monitor to output DC 12V power, audio, video and IR input signals all in one DIN jack to the external monitor. Depending on the connector type of the monitor, you can use the supplied DIN convertor cable, or the DIN cable that we may supply as the optional accessory.
4.A/V Inputs:
a.Plug the video output from an auxiliary source such as Game and Camcorder into the yellow video jack,
and the audio L and audio R into the appropriate jacks in the front of the unit.
NOTE: Plugging into the front panel A/V inputs overides all other inputs. (TV, VCP, Rear Aux input)
b. Plug the video output from an auxiliary source such as DVD Player, VCP, VCR and so on into yellow video jack, and the audio L and audio R into the appropriate jacks in the rear of the unit.
5.External Speaker:
Input the plug of the separate Speaker into the SPEAKEROUTPUT JACK for transmitting the sound from
16
128-6163
16 of 24