PLAY Button (11)
Press this key to play back a recorded tape. In the playback mode, the annunciator says “Play” and the playback indicator lights.
STOP Button (12)
When pressed once, the annunciator says “Stop” and the tape is stopped. When pressed again the tape is ejected.
I. Getting Started
VCP TO VEHICLE CONNECTION
•Connect the unit to a 12 Vdc source only.
•The unit should be connected to the vehicle only after verifying the polarity of the Power Source (12 Vdc with negative ground).
12 VOLT POWER NOTES
•This VCP operates on 12 Vdc only. If you apply more than 18 Vdc, the VCP will automatically turnoff.
15
128-6163
15 of 24