5.Press ENTER to accept the displayed setting.
The change will be retained in memory even if the treadmill is turned Off and unplugged.
6.If you want to exit without saving the change, press STOP.
Informational Displays
The treadmill provides information about its use (odometer and hour meter), as well as the software version. In general, you would only access this information if directed to do so by Precor Customer Support.
These instructions guide you through the informational displays. Pressing the ENTER key resets the odometer and hour meter. To exit without resetting, press STOP at any time.
Viewing the Odometer
1.Remove the magnetic safety key.
2.Replace the magnetic safety key and within 2 seconds press the following keys:
STOP, INCLINE ▲ and SPEED ▼
Note: If the keys are not pressed within the
3.ODOMETER appears in the display.
The software version appears in the center display. The odometer value (the cumulative miles or kilometers users have traveled) appears in the DISTANCE display. The furthest digit on the left marks the hundred- thousandths position, while the furthest digit to the right indicates tenths of a mile or kilometer.
The TIME display provides the hour meter (the number of hours the unit has been in use). If you have not used the treadmill for more than an hour, a zero will appear in the TIME display.
4.To exit without making changes, press STOP.
Owner’s Manual: Advanced Programming and Troubleshooting | 38 |
