Sony DS-2 manual Disconnecting from Your PC, Connecting to Your PC, Disconnect the USB cable

Page 48

Connecting to Your PC

Notes

•When connecting this recorder with the PC and utilize DSS Player, in the menu setting of this recorder set the USB class to the “MASS STORAGE” class. If connected by “AUDIO CLASS”, this recorder will not be recognized as a removable disk drive.

•Be sure to use the attached dedicated cable for the USB connecting cable. If any other company’s cable is used, it will be the cause trouble. Also, please do not connect this dedicated cable to any other company’s product.

Connecting to

Your PC

Disconnecting from Your PC

Windows

Click the	on the task bar
1 located at the lower-right corner
of the screen. Click [Safely
Remove Hardware].

It will read [Stop USB Disk-Drive] for
Windows Me. The drive letter will differ		1
depending on the PC being used.
2 Disconnect the USB cable.

Macintosh

1 Move the icon of the recorder's drive displayed on desktop to trash box by drag and drop.

2 Disconnect the USB cable.

Image 48

Contents DS-2 Table of Contents Connecting to Your PC Running DSS Player Upgrade FunctionUsing as External Memory Computer Alarm Message List TroubleshootingUsing the Online Manual Safe and Proper UsageGeneral Precautions Main Features Recording timeYou may assign your own names to folders Recorder has a Noise Cancel Function.*2 P.30 Playback speed can be controlled as preferredSet interval Main Features Identification of Parts Display LCD Panel Identification of PartsBattery cover open Inserting BatteriesLightly press down on the arrow and slide Replacing batteriesSetting the Hold switch to the Hold position Remember to reset the Hold switch when using the recorderHold Setting Time/Date TIME&DATE Set the hourSet the minute Set the yearSetting Time/Date TIME&DATE Changing the Time/DateMenu List Main MenuPress and hold the MENU/SET button for 1secomd or longer Sub Menu Menu ListRecording Press the Folder button to choose a folderPress the REC button to start RecordingUsing the Variable Control Voice Actuator Vcva Recording functionsPause Resume RecordingRecording Modes REC Mode Press and hold the MENU/SET button for 1 second or longerPress and hold the MENU/SET button for 1 second or longer Press the 3or 2button to chooseMain menu opens P.15 Press the 3or 2button to choose between on and OFFAdjust the start/stop actuation level Press the REC button to start recordingMicrophone sensitivity setup process begins High-sensitivity mode that records sounds in all directionsLow-sensitivity mode suited for dictation Microphone Sensitivity MIC SensePlaying Save Function of the Playback End Position PlayingHow to Cancel OperationPlaying Last File End Repeat Playback Cancel the continuous playback function Positions until you cancel RepeatPlayback If continuous playback is set to onNoise Cancel Function Press and hold the MENU/SETButton for 1 second or longer While the file is playingCancel is flashing ErasingErasing One File at a Time Press the Erase buttonErasing While Start flashingStart is flashing. When the 2 button Erase All Files from a FolderPress the Erase button for Seconds or longerDisplay changes to ALL Erase Erasing will startSetting an Index Mark Index MarksLocating an Index Mark Clearing an Index MarkErasing While in stop or playback mode LCD Display InformationPress the Display button While in record mode While recording in Vcva modeLCD Display Information Formatting the Recorder Format Press the 3 or 2 button to choose SUB MenuPress the 3or 2button to choose Format Press the 3 button to choose StartFormatting the Recorder Format Press the 3 button again to choose StartAgain Using DSS Player Software Precautions on using the recorder connected to a PCOperating Environment Basic Operating Environment of DSS PlayerInstalling Software Be sure to confirm the following before installationInstallation program will start Applications included with DSS PlayerInstalling DSS Player Installing the Device DriverInstalling Software Select where to install DSS PlayerCompleting setup Installing DSS PlayerInstallation has finished. Click Quit Insert DSS Player into the CD-ROM driveUsing Online Help Search by ContentsSearch by Key word Connecting to Your PC Connecting to your PC using the USB cableDisconnecting from Your PC Connecting to Your PCDisconnect the USB cable Connecting to Your PC Connecting to your PC using the cradle Place the recorder on the cradleConnect Mark of the USB Remove the recorder from the cradle Running DSS Player Manual startMac version DSS Player has no automatic start function Plus Upgrade Function Purchase and UpgradeStart the DSS Player Please see P.52 for the starting methodSelect Upgrade to DSS Player Plus from the Help menu Upgrade to DSS Player Plus dialog will be displayedUpgrading to DSS Player Plus Using as External Memory of the Computer Start Windows Connecting the recorder to your PCCopy the data Alarm Message List Message Meaning ExplanationAction Alarm Message List Troubleshooting Symptom Probable cause ActionTroubleshooting SymptomAccessories optional Specifications Technical Assistance and Support