Sylvania DVR91VG manual Hints for Timer Recording, Priority of overlapped settings

Page 33

Recording

Timer Recording (cont’d)

Hints for Timer Recording

•If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer settings will be lost.

•If a recordable disc is not on the tray or an unrecordable disc is on the tray, the DVD indicator on the front panel flashes and Timer recording cannot be performed. In some cases, the DVD indicator appears momentarily around the Timer starting time as the unit attempts to record. Please insert a recordable disc.

•If a videotape with a record tab is not in the cassette compartment or there is no videotape in the compartment, the VCR indicator on the front panel flashes and timer recording cannot be performed. Please insert a recordable videotape.

•If you press [POWER] and turn on the unit while either DVD or VCR is in timer standby mode, disappears. In this case, you cannot change the mode between DVD and VCR. You cannot change any settings using [SETUP] or edit discs.

•After step 9 on page 32, you can turn on the power to use the side of the unit that is free from Timer Recording (either DVD or VCR) for another recording by pressing [POWER] during timer standby. During Timer Recording, press [OUTPUT SELECT] on the front panel, or [DVD] or [VCR] on the remote control. Note that you cannot change channels after Timer Recording started. You can use all recording/recording pause/OTR functions. However, the unit will begin receiving channel signals for Timer Recording 2 minutes before the programmed starting time. Unless the program that you are currently recording using the Timer Recording free side of the unit is on the same channel with the one programmed for Timer Recording, the unit prioritizes Timer Recording and the current recording will be automatically stopped. If the channels set for Timer recording and the current recording are same, the current recording will continue without interruption.

•If both DVD and VCR are timer programmed, you cannot use any functions for either unit during timer standby or Timer Recording. If you want to use functions other than recording under such condition, cancel Timer Recording by pressing [T-SET]during timer standby or stop recording by pressing [STOP] on the front panel during Timer Recording.

•When the starting and ending time are same, the recording will be set for 24 hours. When the disc reaches the end during the recording, the unit turns itself off. If you want to continue the recording, cancel timer standby by pressing [T-SET], insert a new disc, and then press [T-SET]again. If you are recording on a tape, the unit automatically ejects the tape when it reaches the end. You can continue the recording by inserting a new tape.

•When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing.

•If the starting time is earlier and the ending time is later than the current time, the recording will start right after you press [T-SET].

•The Timer Recording cannot be performed in DVD and VCR at the same time. If you set two programming with the same channel and time in both units, the program with a lower program number will be recorded.

The priority of overlapped settings

This unit prioritize recording as follows if the timer programmings are overlapped.

A Timer Recording of lower priority will be canceled, start from the middle or stop on the way. Check the overlapped timer programmings and change the priority if necessary.

Before you start Connections Getting started Recording Playing discs

A programming with a lower program number has priority When the starting time is same:

A program with a lower program number (PROG. 1) has priority.

PROG. 1

PROG. 2

Actual

 

 

 

recording

PROG. 1

 

PROG. 2

 

 

 

 

The first 30 seconds (at the longest) will be cut off.

When some programming have been made around the end time of the program currently being recorded:

A program with a lower program number (PROG. 2) has priority.

PROG. 1

 

 

PROG. 2

 

 

PROG. 3

 

 

Actual

PROG. 1

PROG. 2

recording

 

 

The first 30 seconds (at the longest) will be cut off.

Editing

When the recording time is partially overlapped:

PROG. 1 will start after PROG. 2 recording is completed.

PROG. 1

PROG. 2

 

 

 

Actual

 

 

 

recording

PROG. 2

 

PROG. 1

 

 

 

 

The first 30 seconds (at the longest) will be cut off.

When the recording time is entirely overlapped:

PROG.1 will not be recorded at all.

PROG. 1

 

PROG. 2

 

Actual

PROG. 2

recording

 

Changing the Setup menu VCR

Note for DVD recording

•When the recording time of two programs are overlapped, or the End time of a program and the Start time of another are the same, the first

30 seconds (at the longest) of the subsequent program will be cut off.

•If the cut-off portion reaches one minute or more, this program will be displayed with error number E40 on the timer programming list.

When the End time of the programming currently being recorded and the Start time of the subsequent program are same:

If PROG. 1 is recorded on a DVD, the beginning of the PROG. 2 may be cut off. The amount of time cut off differs depending on the recording media. For example, if both PROG. 1 and PROG. 2 are recorded on DVD, the first 30 seconds (at the longest) of PROG. 2 will be cut off.

PROG. 1

PROG. 2

 

 

 

Actual

 

 

 

recording

PROG. 1

 

PROG. 2

 

 

 

 

The first 30 seconds (at the longest) will be cut off.

EN 33

functions Others Español

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Changing the Setup menu VCR functions Others Español Supplied AccessoryRecordable disc EditingLaser Safety PrecautionsBefore you start Make your contribution to the environmentBefore you Precautions cont’dAvoid the Hazards of Electrical Shock and Fire Installation LocationMoisture Condensation Warning About CopyrightMaintenance With an AM radioDolby Digital Recording Table of contents Recording FeaturesEditing CompatibilityRear Panel Front PanelFunctional overview cont’d Remote ControlUsing a remote control Installing batteries in the remote controlVCR / DVD recorder switching Either side of the center approx feet 5m withinSetup menus Display menu DVD mode First DVDFront Panel Display Guide Changing the Editing Setup menu VCRDisplay message Getting started Recording Playing discsConnections Plug in the AC power cord of this unitConnection to a TV Audio OUT Video OUTConnection to a cable box or satellite box Connection to a TV cont’dBefore you start Connections Getting started Recording Playing discsConnection to an Audio System Audio OUTDigital Audio OUT Easy DVD recording Getting startedInstructions continue on the next page. EN Before you startSelect Record Recording Desired On DVD Speed Channel Disc Easy DVD recording cont’dInitial setting Channel settingGetting channels automatically Press Setup Using K / L, select Channel Press Enter Channel setting cont’dUsing K / L, select Manual Preset. Press Enter Adding / deleting channelsUsing K / L, select Stereo or SAP. Press Enter Using K / L, select TV Audio Select. Press EnterSelecting the TV stereo or SAP SAP Secondary Audio ProgramAuto Clock Setting Setting the clockPress Setup Using K / L, select Clock Press Enter Press Setup to exit Press Power to turn off the unitSetting the clock cont’d Manual Clock SettingChanging the Setup menu Using K / L, select Daylight Saving Time. Press Enter Setting the Daylight Saving TimeUsing K / L, select TV Aspect. Press Enter Selecting the TV aspect ratioInformation on DVD recording RecordingInformation Recordable discRestrictions on recording Information on DVD recording cont’dMaking discs playable on other DVD player Finalize Information on copy controlChoosing the recording format of a blank disc Formatting a discSetting for Auto Chapter Formatting a disc cont’dReformatting a disc Disc tray guide Basic recordingFirst DVD Turn on the unit and load a recordable disc One-touch Timer Recording OTRMake sure that the TV input is set on the unit 030 Normal Recording 800Timer Recording Timer Recording cont’d Hints for Timer Recording Priority of overlapped settingsChanging the Setup menu VCR Connection to an external source Settings for an external sourceAnother source VCR camcorder etcSetting a disc to protect Settings for an external source cont’dChanging the Editing Setup menu VCR functions Recording from an external sourceFinalizing the discs Using K / L, select Finalize Press EnterDVD-RW only 36 ENUsing K / L, select on Press Enter Press Setup Using K / L, select Recording. Press EnterFinalizing the discs cont’d Auto finalizeMake sure Dubbing ModeOthers Dubbing Mode cont’dInformation on DVD playback Playing discsPlayback Basic playbackDisc tray GuideBasic playback cont’d Playing discs using the Disc menuPlaying back discs using the Title menu PauseYou Resume playback Special playbackSkipping TV commercials during playback X40Rapid Play Special playback cont’dStep by step playback Slow forward / Slow reverse playUsing / B, select . Press Enter Marker SetupZoom During playback, press ZoomUsing Display Using Skip H / GSearch Title / Chapter searchSearch cont’d Using / B, select Press EnterTrack search Time searchRepeat/Random/Program playback Repeat playbackRandom play Repeat/Random/Program playback cont’d Switching subtitlesSelecting the format of audio and video Program playSwitching virtual surround system Switching audio soundtrackSelecting the format of audio and video cont’d EnterUsing K / L, select OFF Switching camera anglesVisual Noise Reduction Type 1 or TypeInformation on disc editing EditingDeleting titles Editing discs in Video modeUsing K / L, select Edit Title Name. Press Enter Editing discs in Video mode cont’dPutting names on titles Press Return and then Return or Stop C to exitMarker will be added or deleting Setting or clearing chapter markersEditing discs in VR mode Original Setting titles to protect Editing discs in VR mode Original cont’dUsing K / L, select Protect Press Enter To exitYou can cancel the title-protecting feature Releasing titles from protectingConfirm the indication On OFF. Press Enter Editing discs in VR mode Playlist Dividing a title Editing discs in VR mode Playlist cont’dUsing K / L, select Title Combining. Press Enter Using s / B, select Yes Press EnterCombining titles Deleting a Playlist Adding titles to a PlaylistUsing K /L, select Edit Press Enter Editing discs in VR mode Original / PlaylistUsing K / L, select Delete Press Enter Deleting parts of titlesReturn You StartWhen you select Add at , a Editing discs in VR mode Original / Playlist cont’dPlaylist Delete You cannot delete the first Chapter of each titleChanging the Editing Setup menu VCR functions Others Setting pictures for thumbnailsRecording Playing discs Picture for thumbnail will be set. PlaylistChanging the Setup menu Tour of the Setup menuSetup Items highlight is the default Contents Language setting Display setting Language setting cont’dPress Setup Using K / L, select Display. Press Enter Angle Icon Default onAudio setting Display setting cont’dSettings for PCM Default 48kHz Editing Setup menu ChangingVideo setting Audio setting cont’dSettings for Dolby Digital Default Stream Press Setup to exitVideo setting cont’d Settings for Parental lock levelPress Stop C if you are playing a disc Password has not been set yet Settings for Parental lock level cont’dPassword has been set already YesVCR functions Recording and One-touch Timer RecordingPlayback RecordingRecording and One-touch Timer Recording cont’d One-touch Timer Recording OTRIndex search Other operations Symptom TroubleshootingOthers RemedySymptom Remedy Or Setup toYou press OPEN/CLOSE a Error message Cause Solution Troubleshooting cont’d80 EN Disc MAY not workBefore you start Connections Getting started RF output switchEach time the RF output Panel displayLanguage code GlossarySpecifications Frequently Asked QuestionsGeneral TunerFácil grabación de DVD EspañolSugerencia 2 Edite el disco grabado Sugerencia 1 Reproduzca el contenido grabadoReproducción con videograbadora Se hará una pausa de reproducción y se silenciará el sonido86 ES Grabación Grabación con temporizador de un toque OTRStop C Tel Customer ServiceLimits and Exclusions Funai CorporationNumber inside the globe refers to region of the world IDVD+R/+RW discs can be played back only on this unitFunctions Attributes DVD-RWSelect any blank line with K / L and press Enter After all recordings, finalize your discHints for DVD Recording Play Back DVD-R or DVD-RW

DVR91VG specifications

The Sylvania DVR91VG is a versatile and feature-rich digital video recorder that has garnered attention for its user-friendly design and robust capabilities. Designed for modern households, the DVR91VG offers a seamless way to capture, store, and view television content, making it a popular choice among DVR enthusiasts.

One of the standout features of the Sylvania DVR91VG is its dual tuner functionality. This allows users to record two different shows simultaneously while still watching another program, eliminating the frustrations of scheduling conflicts and ensuring that viewers never miss their favorite content. The device supports high-definition recording, providing crisp and clear video quality that enhances the viewing experience.

The DVR91VG comes equipped with a generous hard drive capacity, allowing for the storage of numerous hours of programming. With its easy-to-navigate interface, users can effortlessly manage their recordings, schedule new ones, and delete content to free up space. The device also supports series recording, enabling users to capture entire seasons of their favorite shows automatically.

In terms of connectivity, the Sylvania DVR91VG offers multiple input options including HDMI, USB, and composite outputs. This makes it compatible with a wide range of televisions and external devices. The built-in USB port allows for easy transfer of recorded content to external drives, making it simple for users to back up their favorite shows or movies.

Another notable characteristic of the Sylvania DVR91VG is its compatibility with multiple video formats. This flexibility enables it to play back a variety of media types, including standard and high-definition videos. Additionally, the DVR supports Time Shift Recording, which allows users to pause live TV and resume it later, a great feature for those who need to step away during a program.

The Sylvania DVR91VG is designed with energy efficiency in mind. It operates quietly and has energy-saving modes that minimize power consumption when not in use, making it an environmentally friendly choice.

Overall, the Sylvania DVR91VG blends functionality with modern technology to provide an efficient solution for capturing and enjoying television content. With its array of features and user-centric design, it stands out as a reliable choice for both casual viewers and serious home entertainment enthusiasts.
Top Page Image Contents