Sylvania DVC860E owner manual Hint for Cable Box or Satellite Box, Connection to an Audio System

Page 6

Hint for Cable Box or Satellite Box

Setup

Connection A

 

 

(Back of DVD/VCR)

 

(Cable box or

 

 

 

Satellite box)

ANT-IN

 

 

IN

OUT

ANT-OUT

RF Cable

E

 

Cable

 

 

 

 

 

 

(supplied)

 

Signal

(Back of TV)

 

Select this connection when you want to view or record a scram- bled channel. With this connection, channels cannot be changed on the DVD/VCR. You can view or record ONLY the channels you have selected on the cable box or the satellite box.

While you are recording, only the recorded channel can be viewed.

To select channels of the cable box or satellite box

1)Turn on the DVD/VCR by pressing the POWER button, and then, press the VCR/TV button.The “POWER” and “VCR” indi- cators on the front panel will light on. Then, press the CHAN-

NEL buttons to select channel 3 or 4 (the same channel as the output channel of the cable b ox or satellite box).

• If you use the channel 4, you need to change the DVD/VCR’s RF output to channel 4. Refer to “RF Output Channel”.

2)At the TV, select channel 3 or 4 (the same channel as you have selected at step 1).

3)At the cable box or satellite box, select the channel you want to

view or record.

Connection B

(Back of DVD/VCR)

 

 

ANT-IN

(Cable box or

 

Cable

ANT-OUT

Satellite box)

E

Signal

 

IN

OUT

 

RF Cable (supplied)

 

RF Cable

(Back of TV)

 

 

Select this connection when you want to change channels on the DVD/VCR. With this connection, you may watch one channel while recording another.

• You may not view or record a scrambled channel.

To select channels of the cable box or satellite box

1)At the cable box or satellite box, select channel 3 or 4 (the same channel as the DVD/VCR’s RF output channel.)

• Refer to “RF Output Channel”.

2)At the TV, select the same channel as the output channel (3 or 4) of the cable box or satellite box.

3)Turn on the DVD/VCR by pressing the POWER button, and then, press the VCR/TV button. The “POWER” and “VCR” indi- cators on the front panel will light on. Then, select the channel you want to view or record.

To play back a tape

Follow the steps 1) to 2) above. Then, play back a tape.

• Refer to “Playback” on page 11.

To view one channel while recording another

1)While you are recording on the DVD/VCR, press the VCR/TV but- ton so that the “VCR” indicator disappears on the DVD/VCR.

2)At the cable box or satellite box, select the channel you want to view.

Connection to an Audio System

Method 1

Stereo system

Analog audio input jacks

RL

AUDIO

Audio cable

(supplied)

DVD/VCR

VCR

AUDIO OUT

AUDIO IN

L

L

R

R

VIDEO OUT

VIDEO IN

DVD/VCR

 

Method 2

Dolby Digital decoder

COAXIAL

 

 

Digital audio

 

 

input jacks

Audio Coaxial

 

 

 

Digital cable

 

 

 

(commercially

 

 

 

available)

 

 

 

 

DVD

 

 

DIGITAL

AUDIO

S-VIDEOCOMPONENT

AUDIO OUT

OUT

OUT

VIDEO OUT

Y

 

 

 

 

L

 

 

 

 

 

CB/

COAXIAL

 

 

PB

DIGITAL

R

 

 

 

 

CR/

(Analog)

 

DVD

 

DIGITAL

AUDIO S-VIDEO

COMPONENT

VIDEO OUT

AUDIO OUT

AUDIO OUT

OUT OUT

Y

 

 

 

 

 

L

 

CB/

COAXIAL

PB

R

 

 

CR/

PR

WARNING!

AUDIO OUT

Note

PR

Set “DOLBY DIGITAL” to “OFF” on the AUDIO menu (refer to pages 20-21.) Otherwise, you may generate noise distortion and/or damage the speakers.

Set “DOLBY DIGITAL” to “ON” on the AUDIO menu for Dolby Digital sounds (refer to pages 20-21.)

The audio source in a 5.1 channel Dolby Digital surround format cannot be recorded in the same format by an MD or DAT deck.

– 6 –

EN

Image 6
Contents Supplied Accessory Table of ContentsBasic TV Connection Make your contribution to the environment PrecautionsLaser Safety Serial NoImportant Safeguards About Copyright Installation LocationMoisture Condensation Warning Avoid the Hazards of Electrical Shock and FirePlayable Discs Setup About the DiscsConnections Unplayable DiscsHint for Cable Box or Satellite Box Connection to an Audio SystemMethod Connection to a TV for VideoFront & Rear Terminals If your TV is compatible with progressive scanning 480pInstalling the Batteries for the Remote Control About the Remote Control and Front PanelRemote Controls Install two AA batteriesVCR/DVD Switching Front Panel DisplayPreset for Use Clock Set UpTurn on the unit for the first time VCR Function Playback Recording & OTR One Touch RecordingOther Operations To Check, Correct, or Cancel a Timer Program Recording FeaturesTimer Recording On-Screen OperationsMTS System Multi-Channel Television Sound Hint for Timer RecordingWhen You Play Back a Tape Recorded in Hi-Fi Stereo Copying a Video TapeIndex Search Special FeaturesTime Search Auto RepeatDVD Function Playback MP3 Playback On-Screen DisplayMP3 Playback Track Search Marker SetupSearch Function Title / Chapter SearchRepeat A-B Playback Repeat / Random / Programmed PlaybackRepeat Playback Random PlaybackSpecial Settings DVD Set Up Language Setting20 a 21 B 21 C See Hint to the right Display SettingAudio Setting Minutes of no useDVD Functions Parental SettingIf you have set a password already Parental menuTroubleshooting Guide Maintenance SpecificationsLanguage List For Spanish For Spanish For Spanish 0VMN04012 / H9600UD TelVan Ness Avenue, Torrance, CA Head Office 100 North Street, Teterboro, NJ