Eizo FS2331 user manual Troubleshooting, No picture, Problem Possible cause and remedy

Page 37

Chapter 6 Troubleshooting

If a problem still remains after applying the suggested remedies, contact your local dealer.

No picture

 

Problem

 

Possible cause and remedy

1.

No picture

•

Check whether the power cord is connected properly.

•

Power indicator does not light.

•

Turn the main power switch on.

 

 

 

•

Press

on the remote control (or on the

 

 

 

monitor).

 

 

 

 

 

 

•

Turn off the main power, and then turn it on again a

 

 

 

few minutes later.

 

•

Power indicator is lighting blue.

•

Increase “Brightness”, “Contrast”, or “Gain” in the

 

 

 

Setting menu (see “To perform advanced adjustments”

 

 

 

(page 16)).

 

 

 

 

•

Power indicator is lighting orange.

•

Check whether the signal cable is connected properly.

 

 

•

Check whether the external device is turned on.

 

 

•

Operate the mouse or keyboard.

 

 

•

Switch the input signal.

 

 

 

•

If an external device is plugged into the HDMI port,

 

 

 

change the HDCP authentication setting. Power off

 

 

 

once and then press

 

 

on the monitor for five

 

 

 

 

 

 

 

seconds or more to change the setting and then turn

 

 

 

on the power again. (see “3-8. Changing the HDCP

 

 

 

authentication setting for HDMI signal input” (page 30)).

2.The message below appears.This message appears when the signal is not input correctly even when the monitor functions properly.

Example:

•

The message shows that the input signal is out of the

 

 

 

specified range.

 

 

 

 

PC2(D-SUB)

•

When the analog signal (D-Sub)/ digital signal (DVI-D,

 

Signal Error

 

HDMI: PC signal) is input, take the measures below:

 

 

 

--Check whether the PC is configured to meet the

 

 

 

 

 

 

resolution and vertical scan frequency requirements

 

 

 

of the monitor (see “2-1. Compatible Resolutions/

 

 

 

Formats” (page 13)).

 

 

 

--Reboot the PC.

 

 

 

--Select an appropriate display mode using the

 

 

 

graphics board’s utility. Refer to the manual of the

 

 

 

graphics board for details.

Chapter 6 Troubleshooting 37

Page 36 Page 38
Image 37
Page 36 Page 38
Contents Page For USA-California Only Location of Caution StatementPage To use the monitor comfortably CleaningContents Limited Warranty Introduction FeaturesIntroduction Monitor Controls and FunctionsBefore Using Remote Control How to install battery Remote ControlReceivable Range of Remote Control Eizo LCD Utility Disk Disk contents and software overviewTo use ScreenManager Pro for LCDDDC/CI/EIZO ScreenSlicer Adjusting/Setting Displaying the Setting menuBasic operation of the Setting menu Basic Operations and FunctionsFunctions Main menu Setting ReferenceCompatible Resolutions/Formats Adjusting ScreensDigital Input DVI-D, Hdmi PC signal Digital Input Hdmi video signalWindows Setting the ResolutionWindows Vista Windows XPTo select the display mode Color Mode Adjusting ColorProcedure Display Modes PurposeAdjustable settings in each mode To perform advanced adjustmentsColor Mode FunctionTo adjust black level Black Level To adjust brightness BrightnessAdjustable range Procedure To adjust the color saturation Saturation To adjust contrast ContrastAdjustable range To adjust color temperature Temperature To adjust hue HueTo set ContrastEnhancer ContrastEnhancer To reduce image blur Power ResolutionTo adjust gain Gain To adjust gamma GammaDigital Signal Input Screen AdjustmentAnalog Signal Input To set overdrive intensity OverdrivePrepare to use analog screen adjustment patterns Setting Procedures Perform the auto adjustmentTo eliminate vertical bars Clock To remove flickering or blurring PhaseTo adjust color gradation automatically Auto Range Adjust Adjusting color gradationTo correct the screen position Position Setting Function Analog Input D-Sub/Digital Input DVI-D, Hdmi PC signalScreen Size Changing Modify blurred characters or linesTo set the screen ratio Overscan Setting Function Screen DisplayImage Off Displays most of the input imageAdjusting Volume Setting MonitorSwitching sound source for Hdmi signal input Source To turn the volume up/downEnabling/Disabling DDC/CI communication DDC/CI To adjust the sound level Sound LevelLocking Buttons Key Lock Setting Language Language Setting the Eizo Logo Display LogoSetting Input port Signal Error Selectable languagesTo reset the color adjustments Color Reset Resetting the Monitor to the Default SettingsTo reset all adjustments to the default settings Reset Setting Power Saving Power Save Power Saving FunctionsMonitor Exiting the power saving mode Setting Power Indicator Power IndicatorAudio Output Enabling/Disabling Auto Power-OFF Off Timer min Checking the power saving levelExtending the time of the Off Timer Canceling Off TimerChecking the remaining time Connecting Multiple External Devices Connecting CablesTo switch among input signals Connecting CablesProblem Possible cause and remedy TroubleshootingNo picture Imaging problems for digital only Imaging problems for both digital and analogUse Position in the Setting menu to correct Imaging problems for analog onlyIf available to change the display position Other problems Reference How to Attach the Optional ArmAttach the arm or stand to the monitor ReferenceDisplaying Monitor Information Information Attaching the Stand baseSpecifications Main Default Settings Accessories Outside DimensionsGlossary Range Adjustment PhaseResolution TemperaturePreset Timing Trademark AppendixLicense AppendixFCC Declaration of Conformity TCOHinweis zur Ergonomie Limited Warranty DerursprünglichenGarantiefrist Begrenzte GarantieAucundesdroitsreconnusparlaloiàl’Acheteurinitial Garantie Limitée ToutdéfautduProduitcauséparunappareilexterne PériodedegarantieinitialeNingúnderecholegaldelCompradororiginal Garantía LimitadaVencerelPeriododegarantíaoriginal Garanziaoriginale Garanzia LimitataSombeskrivsnedan Begränsad GarantiUrsprungligaGarantiperioden Περιορισμενη Εγγυηση  ЛюбыедефектыПродукта,вызванныевнешнимоборудованием Ограниченная Гарантия有限责任保证书 关于电子信息产品污染控制标识 China Measures for RoHS Compliance in ChinaRoHS03V23307D1 U.M-FS2331
Related manuals
Manual 2 pages 56.87 Kb

FS2331 specifications

The Eizo FS2333-BK and FS2331 are monitors designed with professionals in mind, particularly those in graphic design, photography, and video editing. These models are part of Eizo's FlexScan series, which emphasizes high-quality visuals, ergonomic features, and energy efficiency.

One of the standout features of the FS2333-BK and FS2331 is their superb color accuracy. Both monitors utilize an IPS panel technology, which ensures consistent color reproduction from wide viewing angles. This capability is crucial for professionals who rely on precise color representation in their work. The monitors cover a wide color gamut, including sRGB and Adobe RGB, making them suitable for various color-critical tasks.

In terms of resolution, both the FS2333-BK and FS2331 offer a native resolution of 1920x1080 (Full HD). This resolution strikes a balance between detailed images and efficient screen space, allowing for multitasking without overwhelming the user. With a pixel density that promotes sharp visuals, these monitors effectively reduce eye strain, making them ideal for extended use.

Eizo has also incorporated several eye-care technologies into these monitors. The FS2333-BK and FS2331 feature flicker-free technology that eliminates screen flicker at all brightness levels, a common issue that can lead to eye fatigue. Additionally, they include brightness stabilization features that maintain constant brightness, which helps reduce eye discomfort during long working hours.

Ergonomics is another essential aspect of the FS2333-BK and FS2331. Both models come equipped with adjustable stands that support height adjustment, tilt, pivot, and swivel functions. This flexibility allows users to customize their viewing experience to suit their individual comfort and workspace requirements. Moreover, the monitors are VESA compatible, allowing for easy wall mounting or use with monitor arms.

Connectivity options are abundant with multiple inputs, including HDMI, DisplayPort, and DVI-D, ensuring compatibility with a variety of devices. The built-in USB hub allows for easy connection of peripherals, such as keyboards and mice, enhancing workflow efficiency.

Overall, the Eizo FS2333-BK and FS2331 stand out in the market for their exceptional color accuracy, ergonomic design, and eye-care technologies, making them ideal choices for professionals who demand performance and comfort in their display solutions.
Top Page Image Contents