Miele H 5240 BP, H 5140 BP Problem solving guide, Possible cause and remedy

Problem solving guide

Problem Possible cause and remedy

A fault code appears in the display F + a number

You can rectify the following faults yourself:

–Fault 23: The temperature required for pyrolytic cleaning was not reached.

This could have been caused by too much soiling in the oven to start with.

Remove all coarse soiling before starting the pyrolytic cleaning programme again.

If the fault message appears again please contact the Miele Service Department.

–Fault 32: The door has not locked for the pyrolytic cleaning process.

Switch the oven off and start the pyrolytic cleaning process again.

If the fault code appears again call the Miele Service Department.

–Fault 33: The door lock for the pyrolytic cleaning process will not open.

Interrupt the pyrolytic cleaning programme by switching the oven off. If the door will still not open please contact the Miele Service Department.

–Fault 55: Safety switch-off has been triggered.

The appliance will be ready for use again after it has been switched off and then back on again.

For all other fault codes please contact the Miele Ser- vice Department.

64