Miele H 5140 BP I, Starting a pyrolytic process, At the end of pyrolytic cleaning process

Cleaning and care

Starting a pyrolytic process

￿Take all accessories out of the oven.

￿Select the "Pyrolytic ￿" function.

Py I

PY I will appear in the display. The number will start flashing.

￿Use the ￿ or ￿ sensor to scoll between PY I, 2 and 3.

￿Start the pyrolytic process required with the OK sensor.

￿Py I

￿

The door will lock and the heating will switch on.

I:53

￿ ￿ ￿ ￿

￿

The duration of the cleaning programme can be seen in the display by calling up the ￿ symbol.

You can set a finish time for the pyrolytic process during the first five minutes after starting the programme, for example, to take advantage of cheaper night electricity tarifs. To do this:

￿ Call up the ￿ symbol and use the ￿ sensor to change the end time.

You can change the end time if you wish at any time up until the programme starts.

At the end of pyrolytic cleaning process

–"PYE" will appear in the display.

–the ￿ symbol will start flashing.

–a buzzer will sound, if it is switched on (see "￿ Settings").

￿Turn the function selector to "0".

The buzzer will stop and the symbols in the display will go out.

If the function selector is not moved, the buzzer (if switched on) will sound every five minutes as a reminder that the programme has finished.

This reminder continues for up to 30 minutes.

53