20 | Logitech® |
|
|
Press DOWN to see Alarm Clock Off. Press right to turn on the alarm. Press right again to turn it off.
To set alarms using the web interface:
1.Open the SlimServer web interface and click on Player Settings for the player.
2.Click on the Alarm tab on the top left area of the page.
3.Use the form to choose which alarms you’d like to set, the time you’d like them to go off and what playlist you’d like to hear when the alarm goes off. Click Change to save your choices.
Once you’ve set the alarms you like, your Transporter will wake up on the day and time you’ve set and start playing.
Tip: You can set unique alarm times for each day of the week under the additional weekday setting.
Graphic Visualizers
Transporter can display graphic visualizers such as spectrum analyzers and VU meters that beat to the music as it’s playing. You can choose to show visualizers on the display all the time or as a screensaver.
Press the VISUAL button on the front panel to rotate through the different visualizers which are displayed on the right side of the display.
To choose a graphic visualizer to display as a screensaver:
1.Under settings, choose Player Settings, then scroll to Screensavers.
2.Choose from the list of screensavers.
Using Transporter as a Wireless Bridge
Transporter has both 802.11g and ethernet connections. You can easily connect non- wireless devices (such as a TiVo, PlayStation, XBox, or a home theatre PC) to your wireless network. To set up Transporter as a wireless bridge:
1.Plug the device that you want to connect to your wireless network into the ethernet port on the back of Transporter using an ethernet crossover cable. You can purchase a crossover cable at most retail computer stores.
2.Press and hold the LEFT arrow on the remote for five seconds to enter the Transporter setup screens.
3.Press UP to scroll to the Set Up Networking selection and press RIGHT.
4.Go through the network setup screens, choosing to connect to a wireless network and then select your region.
5.You are presented with the option to turn on wireless bridging. Select Yes and then press RIGHT.