28
basic features
Recording
TV signals being received by the recorderÕs built in tuner can be recorded onto a video tape. You can ÔcaptureÕ a TV programme using your VCR.
Choose a Programme
before you start
Turn the TV on
Tune the TV to your Video Channel or to its AV mode
Choose a blank cassette which has the record safety tab still in place
Select the channel that you wish to record.
remote control Press PR +/Ð or the number keys.
vcr Press PR +/Ð.
Set the Tape Speed
Press /.
Record
Safety Tab
Load the cassette into the VCR (see page 24)
Check the
Start Recording
Press Ton the VCR or on the Remote Control.
¥If the tape reaches its end during recording, the VCR stops recording, rewinds the tape and ejects the cassette, then enters the standby mode automatically.
Pause and Resume During Recording
On either the VCR or the Remote Control, press to temporarily stop recording and press to resume. You cannot change the preset position on the VCR while it is recording but you can while it is paused (see Choose a Programme at the top of this page).
¥There will be a loss of color, or the picture will be distorted where the channel is changed.