POINTS FOR ATTENTION
Attention: To reduce the risk of fire and electric shock, do not expose this unit to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CLASS 1
LASER PRODUCT
CAUTION:
To reduce the risk of fire and electrical shock, do not remove the cover of this unit. Please refer all servicing difficulties to qualified technicians . This lightning flash arrow symbol in a triangle, is intended to alert users to the presence of
CLASS1:
LASER PRODUCT - This marking indicates the presence of laser beams used in this unit, and CLASS 1 refers to laser beams of the weaker class. There is no danger of hazardous radiation outside this unit.
IMPORTANT NOTICE: | REFER SERVICING ONLY TO QUALIFIED SERVICE PERSONNEL | |
|
|
|
Read through this instruction manual before installation and use.
To disconnect the power cord, hold the plug instead of pulling on the cord.
Switch off the main power when the unit is not in use. (Disconnect the power plug from the power outlet when you do not intend to use the unit for a prolonged period of time.) Before moving the unit, remove the disc from the unit`s tray first.
Do not open the cover or touch any of the components inside the unit.
Do not operate or install the unit under direct sunlight or near objects that radiate heat. This may lead to overheating of the unit.
Do not operate or install the unit in moist or humid conditions. This may affect the
IInstall the unit on a flat surface with good air circulation. Please ensure the ventilation holes are not covered otherwise the unit will overheat and malfunction.
Wipe the panel and case with soft dry cloth only. Do not apply any kind of thinner, alcohol or sprays B1 when cleaning the unit.