Kodak DVD-845 instruction manual Channel cable. Coaxial output

Page 9

OPERATION INTERFACE

The unit supports two choices of audio output: Analogy audio and digital audio. Analog audio includes stereo 2 channel and

5.1channel. Digital audio includes optical and coaxial output. Digital audio obtains a better effect than analog.

Stereo Output:

Connect with audio output jack for the mixing audio of the unit and the stereo input of TV or amplifier by audio cable.

5.1 channel output:

Connect with 5.1 channel output of the unit and corresponding input of amplifier by audio

5.1channel cable. Coaxial output:

Connect the Digital coaxial cable to the coaxial output of the unit and the corresponding input of amplifier.(with digital coaxial inlet)

Optical output:

Connect the Toslink optical cable to the optical output of the unit and the corresponding input of amplifier.(with digital optics inlet). stereo input of TV or amplifier.

Each connection must match to the internal setup of the unit. Please refer to the unit and the connection equipment before connection.

DVD player supplies a wide dynamic range of frequencies so the amplifier volume must be suitable levels or the speakers may be damaged from sudden bursts of high volume sounds.

During the operation, please power off amplifier before power on/off DVD player, the speaker may be damaged.

Setup Before Operation: Before operation, please make sure the following setup is correct.

Audio Output:

The unit has four choices of audio output: 2 channel, digital, 5.1 channel and stereo PCM. Select different setup depending on your connection. For more information, please refer to system setup.

TV System:

Select the corresponding system depending on your TV system. For more information, please refer to system setup.

Video Output:

The unit has three choices of video output: composite video, S-video, component video output. Select different setup depending on your connection. For more information, please refer to system setup.

Note:

DVD disc can support different scale of pictures. Maybe picture is not full screen or part of picture has been blocked.

The manual refer to English OSD.

C5

Image 9
Contents Dvdplayer Accessories FeaturesClass Points for AttentionCLASS1 Important NoticeCare of Remote Control Remote Control OperationSymbol Content Types of Discs That can be UsedFront Panel Operation InterfaceRear Panel VFD DisplayFASTBACKWARD&FASTFORWARD SKIPBACKWARD&SKIPFORWARD Remote ControlVideo System Connection TV/MONITOR Standard Video Input TV/MONITOR Component InputTV/MONITOR S-VIDEO Input TV Input Amplifier Input Audio System ConnectionChannel cable. Coaxial output Basic Playback Basic PlaybackMute Display OSD OFFExit Start Back Prgo TT- -/CH- TT- -TITLECH- -CHAPTERProgmenu SearchPBC Subtitle AngelReturn TitleRepeat Book Mark Clear Line Tone VOL Slow ZoomKaraoke Stop StepMIC Picture CD Play ModeMP3 ProgSystem Setup General SetupMenu Operation Audio Setup Speaker SetupSpeaker Lpcm Output 48K 96K Dynamic Audio Setup Spdif SetupPost DRC CD, Dobly DIGITAL, DTS, Mpeg3D Processing Channel EqualizerHdcd Setup Channel DelayKaraoke Setup Video SetupPreference Adult OFF Password Change Default Reset MainSymptom and Solution Trouble ShootingDVDPLAYER/OUTPUT SpecificationsDVD Player OutputLanguage Abbreviation Additional InformationCare of disc Cleaning of discsStorage of disc Copyright AttentionDTS digital theatre system TermsContents