Kodak 4620 user manual Getting Started, Powering on the unit, Inserting a disc

Page 22

GETTING STARTED

1.

7

2.

POWER DISPLAY SETUP OPEN/CLOSE

TITLE

MENU

GOTO

PROGRAM

 

PBC

 

 

ANGLE

SUBTITLE

AUDIO

MUTE

*Picture of model DVD 4620

Powering on the unit

Only after all connections are complete, connect the power cord and power on the unit.

1.Plug the standard electrical plug into a wall socket or power strip.

2.The unit is now in Standby mode. Press the button “ON/STANDBY” on the front panel or the button “POWER” on your remote control to power the device on. Once the unit has been turned on, the unit will always be either ON or in STANDBY MODE.

Notes on power states

There are three power states for this unit:

•OFF - The unit is not plugged into a wall outlet. The unit draws no power.

•STANDBY - The unit is plugged into a wall outlet. The unit has not been taken out of standby by pressing either the button “ON/STANDBY” on the front panel or the button “POWER” on the remote control. The unit draws a slight amount of power to enable the remote control receiving circuit. The standby LED is glowing red.

•ON - The unit is plugged into a wall outlet and either the button “ON/STANDBY” on the front panel or the button “POWER” on the remote control has been pressed. The unit is ready to use. The LED is now glow- ing green (model DVD 4010) respectively off (model DVD 4620).

3.When the screen display indicates “Loading”, the disc is read.

4.If no disc is inserted, the screen display will indicate “No disc”.

Labeling side

Surface

Inserting a disc

1.Press the Open/Close button “K” on the front panel or on the remote con- trol to open the tray. The screen display will indicate “Open”.

2.Carefully place the disc in the tray with the label facing up. Be careful not to touch the playing surface. Hold the disc by the sides and with your fore fin- ger through the hold in the middle and insert gently into the tray.

How to insert a double-sided DVD?

Double-sided discs do not have labelling over the whole surface. The labelling for each side is in the centre of the disc. To play a side its label must be facing up.

3.Press the Open/Close button “K” again to close the tray. The screen dis- play shows “Close”.

4.The inserted disc type is indicated on the screen. If the disc supports the Auto Play function, playback will begin automatically.

23

ENG

Page 21 Page 23
Image 22
Page 21 Page 23
Contents D 4 0 1 0 & D V D 4 6 2 Content Additional features for Jpeg files Special features for DVD’sSpecial features for Video CD’s Troubleshooting Specifications GlossaryRegion code information AccessoriesIntroduction Or UKCompatibility of PC created discs CompatibilityUsable disc types Data transfer ratesTaking care of player and discs Operation of control panel DVD OperationDisc Tray DVD Operation of rear panel DVD Operation Operation of VFD display DVD MULTI-FUNCTION Display / Text LinePreparing the remote control Operation of remote controlReplacing the battery Using the remote control Important notes about the batteryRemote control buttons Return Volume +Volume BookmarkAudio and Video Connections Television connectionsAudio/Video connection to a TV with Scart socket Have the following cables ready Connecting the player using the component video cable Entering the setup menu to change the Video settingPreparation Audio output connections Using a Progressive Scan TVAnalog stereo outputs Coaxial digital output Loud distorted noise comes from your loudspeakers Getting Started Powering on the unitHow to insert a double-sided DVD? Inserting a discStart playing Pausing a discSwitching off the power Stop playingGeneral playback hints PlaybackPlaying a DVD Playing MPEG-4 or DivX discs Playing a DVD+R/RW, DVD-R/RW or DVD+R DL discPlaying a Super Video CD Decoding of DivXPlaying DivX VOD content Displaying the DivX VOD registration codePlaying an MP3 disc When creating MP3 discs, please note the followingPlaying an Audio CD Additional playing functionsPlaying a WMA CD Playing a Picture CDPlaying a mixed format disc Selecting a section of the disc to play Selecting a chapter using the DVD menuPlaying Functions Playing from a specific timePlaying a specific track, picture, title or chapter Repeating an entire disc or playlist2 Using the repeat features1Skipping through tracks, pictures, titles or chapters Repeating a track, title orShuffle play Repeating a section of a discStill the picture frame / Pause a disc Problem No sound during slow playSlow play Playing a disc frame by frameUsing position markers Bookmark Zooming in and out of an imageSuspending audio with the Mute button Changing the audio settingsDisplaying disc information Press the Display button while a disc is playingDisplay menu for DVDs Display menu for Video CDsTime displays for Audio CDs Using the DVD menu Special Features for DVD’SDisplaying subtitles Using playback control PBC Special Features for Video CD’SChanging the camera angle Navigating to a file or folder Selecting the play modePlaying a file Viewing thumbnails of your Jpeg pictures Additional Features for Jpeg FilesRotation of a picture Making a slide showZooming in and out Creating a Playlist Creating a playlist of DVDsCreating a playlist of Video CDs or Audio CDs Program Track ExitNextUser Preferences Important notes for moving in the setup menuChanging the language settings OSD languageSubtitles1 DVD menu1Audio1 DivX subtitlesTV type Changing the video settingsTV shape Video outputVideo mode only available on model DVD Video quality setup Video qualityAudio output Changing the audio settingsSpeaker setup Post DRCSpdif output Spdif setupDual mono/DRC Dual monoSound setup Changing the security settingsPassword Change PSW ParentalCaptions Changing the general settingsAngle mark Screen saverVersion DefaultDivXR VOD Troubleshooting Flickering black-and-white picture Ejecting a trapped disc Audio features SpecificationsGeneral specifications Audio/Video connectionsGlossary DVD+R DL DVD+RWDVD+R JpegVCD RGBSvcd WMA
Top Page Image Contents