JVC DR-DX5SU manual Dubbing From DV To HDD, Dubbing An Entire Cassette, Dubbing From DV To DVD

				EDITING EN 59
Dubbing From DV To HDD	8 Press selection keys to select AEXECUTEB, then press
(Dubbing An Entire Cassette)		ENTER for confirmation.
		● Once dubbing starts, it will continue dubbing until the end of the
		tape is reached.
It is possible to perform automatic dubbing of all the recorded
		● To cancel the dubbing, press o then selection keys to select
programs of a cassette from the DV deck to the HDD deck using
		ACANCELB and press ENTER to confirm.
the AENTIREB dubbing. You cannot select the images to be
		● If the tape is not rewind, the unit will start dubbing after
dubbed; all recorded images on the DV cassette will be dubbed.
		automatically rewinding the tape to the beginning.
1 Load the Mini DV cassette you want to dub. Make sure its erase
	9 Upon completing dubbing, the tape stops and ADUBBING
protection switch is set to ASAVEB.
		COMPLETEDB appears on the TV screen. Press ENTER to
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 71)
		end.
2 Press DUBBING to access the Dubbing Menu screen.
		● The tape will automatically be rewound.
3 Press selection keys to select ADVNHDDB, then press	NOTES:
ENTER.	● ASUPERIMPOSEB is automatically set to AOFFB. It will return to
4 Select AENTIREB, then press ENTER.		AAUTOB after dubbing is completed.
5 Press selection keys to select ASELECT RECORDING	● The program information at the DV deck will not be dubbed.
	● When there are blanks on the tape of more than 2 seconds, the
MODEB, then press ENTER. Press selection keys to select the
		DVD deck will enter into pause mode while playback on DV deck
desired option, then press ENTER.
		continues. This also applies to portions of the DV tape that are
6 Press selection keys to select ASELECT SOUND MODEB, then
		damaged or unreadable. The last image is displayed on the TV
press ENTER. Press selection keys to select the desired		screen. Dubbing will resume once recorded portion is detected. If
option, then press ENTER.		the blank portion continues until the end of the tape, ADUBBING
7 Press G to select ACONFIRMB, then press ENTER. The		COMPLETEDB appears on the TV screen when the tape end is
confirmation screen appears.		reached and the tape rewinds automatically.
8 Press selection keys to select AEXECUTEB, then press	● Dubbing copyright guarded tape is not possible.
	● When dubbing is in progress, only o is functional.
ENTER for confirmation.
● Once dubbing starts, it will continue dubbing until the end of the	About Disc Remaining Display
tape is reached.
● To cancel the dubbing, press o then selection keys to select	When dubbing from HDD to DVD, the unit displays the time
ACANCELB and press ENTER to confirm.	information for dubbing by bar meter. By comparing the disc
● If the tape is not rewind, the unit will start dubbing after	remaining time and the necessary time for dubbing of the selected
automatically rewinding the tape to the beginning.	items, it is possible to check if the dubbing can be performed
9 Upon completing dubbing, the tape stops and ADUBBING	completely or not.
COMPLETEDB appears on the TV screen. Press ENTER to	When performing the High Speed Dubbing
end.			Capacity of a disc	Remaining capacity
● The tape will automatically be rewound.
NOTES:
● ASUPERIMPOSEB is automatically set to AOFFB. It will return to						21%
AAUTOB after dubbing is completed.		Dark green: Length of already recorded item
● When there are blanks on the tape of more than 2 seconds, the
HDD deck will enter into pause mode while playback on DV deck		Light green: Length of selected item
		Yellow: Length of the item now being selected by arrow
continues. This also applies to portions of the DV tape that are
		Red: Excess over the capacity
damaged or unreadable. The last image is displayed on the TV
screen. Dubbing will resume once recorded portion is detected. If	When performing the Just Dubbing
the blank portion continues until the end of the tape, ADUBBING
COMPLETEDB appears on the TV screen when the tape end is
reached and the tape rewinds automatically.
				TOTAL		105MIN
● Dubbing copyright guarded tape is not possible.
● When dubbing is in progress, only o is functional.	● The unit displays the status on the assumption that the selected
Dubbing From DV To DVD		items are dubbed in the lowest transfer rate.
	● The total time of a loaded disc is displayed on the right of the bar
(Dubbing An Entire Cassette)
		meter.
It is possible to perform automatic dubbing of all the recorded	When performing the Manual Dubbing
programs of a cassette from the DV deck to the DVD deck using
the AENTIREB dubbing. You cannot select the images to be
dubbed; all recorded images on the DV cassette will be dubbed.
					MAX	FR240
1 Load the Mini DV cassette you want to dub. Make sure its erase
protection switch is set to ASAVEB.	● The unit displays the status on the assumption that the selected
● Set ADV AUDIO RECB to the appropriate mode. (A pg. 71)		items are dubbed in the lowest transfer rate.
2 Press DUBBING to access the Dubbing Menu screen.	● The available highest transfer rate is displayed on the right of the
3 Press selection keys to select ADVNDVDB, then press ENTER.		bar meter.

4 Select AENTIREB, then press ENTER.

5 Press selection keys to select ASELECT RECORDING MODEB, then press ENTER. Press selection keys to select the desired option, then press ENTER.

6 Press selection keys to select ASELECT SOUND MODEB, then press ENTER. Press selection keys to select the desired option, then press ENTER.

7 Press G to select ACONFIRMB, then press ENTER. The confirmation screen appears.