EDITING EN 61
●To pause dubbing, press selection keys to select 
, then press ENTER. Both the unit and the external DV equipment pause dubbing. Pressing W on the unit also works the same way.
10 Press selection keys to select 
, then press ENTER. Then press o. The DV equipment stops.
11 Press selection keys to select 
, then press
ENTER.
12 Press o twice on the remote control to stop dubbing.
●Both the unit and the external DV equipment stop dubbing.
NOTES:
●Dubbing copyright guarded programs is not possible.
●Original DV information such as the recording date and time are not recorded.
●The superimposed indication during the operation or dubbing is not recorded.
●If the dubbing is paused while the channel is set to ADVB, you cannot switch channels.
When you dub from DV equipment other than a camcorder
A Perform step 1 to 4.
B Locate the point from where you want to start dubbing, then stop on the DV equipment.
●If you pause the DV equipment in this step, a few second’s still picture will be recorded at the beginning of the recorded program.
CSet the input mode to ADV INPUTB on the DV equipment.
●If you select an input mode other than ADV INPUTB, unwanted pictures may be recorded at the beginning of the recorded program.
DPerform step 9 to 12.
To skip unwanted part of the source picture
Press ENTER to stop both equipment, then press selection keys
to select 
.
Locate the point where you want to restart dubbing by pressing I, N, or O, then press o.
Press selection keys to select 
, then press ENTER to restart dubbing.