Logitech 895 user manual Using the Tilt Sensor, Selecting an Activity

Page 8

User Manual

Harmony 895

 

 

The display and its backlight, and the keypad backlight remain on. Note: Press the GLOW button to turn the backlight off.

The battery level icon in the status bar flashes when the battery is still charging or will display a full battery level when charging is complete.

When the battery is low, the display will flash a message to remind you to charge the battery.

Using the Tilt Sensor

Note: Whenever you pick up the remote from the base station, or replace it in the station, you will hear a beep.

When you pick up the remote slightly tilted, the display will automatically turn on and the keypad light up. To enable/disable these features:

1.From Home in the Harmony software, click Remote Preferences.

2.Click Settings.

Selecting an Activity

View the Activities you have added by pressing the Activities button. The display will then list the Activities you have added. Press the corresponding display button next to the Activity you want to start.

As a default, when you select an Activity, you will see a message on the remote’s display reminding you to keep the remote pointed at your entertainment system while the Activity starts. This helps ensure that all infrared (IR) signals are properly sent.

To turn on/off the “Starting Activity” message:

1.From Home in the Harmony software, click Remote Preferences.

2.Click Settings.

v. 1.0

page 6

Image 8
Contents Harmony Remote Table of Contents Introduction ExampleGetting to Know Your Harmony Remote Beginning the Setup Process Using Your Harmony Remote Using the Remote with the RF Wireless ExtenderInstalling the RF Wireless Extender Wall-MountedUsing the Glow Button Recharging the BatteryAdding the RF Wireless Extender to the Z-Wave Network CabinetUsing the Tilt Sensor Selecting an ActivityTo resynchronize Viewing the Status and Navigation BarsDisplaying Help on Your Harmony Remote Using the Remote Assistant Controlling Individual DevicesTypes of Help Available To select the type of help you wantUsing System Options Using the Teletext ButtonsUpdate Remote Customizing Your Harmony RemoteTroubleshoot View DevicesClick Favorite Channels Customizing the Display on the Harmony RemoteAdding your Favorite Channel Icons Change Behavior of Buttons feature show you Changing the Behavior of Buttons Within an ActivityAdding Custom-Labeled Buttons To change the behavior of buttonsTo add a custom-labeled button for an Activity Changing the Settings for your Harmony RemoteLearning Infrared IR Commands Naming Conventions Using the Infrared SensorNaming an Infrared Command Troubleshooting Your Harmony Remote Feature DescriptionGetting Additional Help Finding Answers to Your Questions