Manual abstract:
Display: Shows a list of your Activities and devices, help, infrared (IR) commands and any available listings. Display Buttons: Use the buttons at the side of the display to select the corresponding command. Left/Right Arrow: Allows you to view more options on the display. Guide: Gives you access to view program listings, if you have a device with this feature. Info: Gives you additional information on program listings, if you have a device with the Guide feature. Exit: Exits from the Guide feature. Menu: Gives you access to the menu system on a device, if you have a device with this feature. Prev: Goes to previous television channel. Glow: Turns on and of the backlight on the Harmony remote. Teletext Buttons: This is a service provided by the television provider.
Use the Teletext buttons to access this service; however, your TV set must be equipped with a Teletext decoder. While Teletext is the default setting for these buttons in the Watch TV Activity, you can customize these buttons to send different commands. Infrared Learning Port: The Harmony remote uses this port to learn commands from your original remote. v. 1.
3 page 2 Harmony 525 User Manual Beginning the Online Setup Process Once you have installed the Logitech Harmony Remote Software, connect your remote and you will be guided through a series of
Using the Glow Button Press the Glow button to light up or turn off the display backlight. To determine the length of time the backlight stays on. Note:
Shaking or tilting the Harmony remote will not light up the display backlight. Users must press the Glow button to light up the display backlight. The remote will go into Deep Sleep mode when the remote detects no motion for two hours. The remote will begin motion sensing in Deep Sleep mode, and any motion or movement in front of the remote will trigger the glow. Use the Harmony Remote Software to enable/disable these features. Displaying Help on Your Harmony Remote From time to time when you select an Activity, the Activity may not work. This can happen when the Harmony remote sends many infrared commands to set up all your devices for an Activity, but one or more devices are not receiving some commands. The Harmony remote is then "out of sync" with your devices (e.
g. it thinks one of your devices is on, but it is turned off). Some of the reasons the Harmony remote can become "out of sync" with your system are: · · · ·
Someone walks between the Harmony remote and your entertainment system while an Activity is starting. You point your Harmony remote away from your
system while an Activity is starting. There is an object blocking the
You are very far away from your entertainment system. You will need to use the Help button on your Harmony remote to resynchronize the remote with your devices. Before resynchronizing, ensure the cause of the problem has been addressed. Example Remove all obstructions so that the entertainment devices can receive the infrared commands from the Harmony remote. To resynchronize: 1.
Press the Help button. 2. Answer the questions on the remote's display by selecting Yes or No. If you answer no to any question, the Harmony remote will
resend the necessary command and ask you the same question again. v. 1..
Your user manual
LOGITECH HARMONY 525
Powered by TCPDF (www.tcpdf.org)